Parking Brake Control
Show/hide table
| NOTICE |
|---|
Do not engage the parking brake while the machine is moving unless an emergency exists. The use of the parking brake as a service brake in regular operation causes severe damage to the parking brake system. |
Show/hide table
 | |
| Illustration 1 | g00683226 |
Show/hide table
| Parking Brake - The parking brake control is located on the operator console. |
In order to apply the parking brake, push the knob downward.
In order to release the parking brake, pull the knob upward.
Note: In order to propel the machine, the propel lever must be in the STOP position before you release the parking brake.
Caterpillar Information System:
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Solenoid Valve (Air Horn)
CB-534C Vibratory Compactor Light Switches
CB-534C Vibratory Compactor Gauges
CB-534C Vibratory Compactor Alert Indicators
CB-534C Vibratory Compactor Battery Disconnect Switch
784C and 785C Off-Highway Trucks Machine Systems Solenoid Valve (Steering) - Remove and Install
583R Pipelayer Engine Supplement Water Pump - Disassemble
583R Pipelayer Power Train Track - Separate
784C and 785C Off-Highway Trucks Machine Systems Relief Valve (Cylinder Crossover) - Install
3406C Engines for Caterpillar Built Machines Fuel Ratio Control
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems System Pressure - Release
CB-534C Vibratory Compactor Propel Control
583R Pipelayer Engine Supplement Water Pump - Assemble
583R Pipelayer Power Train Track - Connect
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Alternator - Remove and Install
980G Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Remove
3406E and 3456 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
980G Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Disassemble
966F Series II Wheel Loader Power Train Output Transfer Gears - Disassemble
784C and 785C Off-Highway Trucks Machine Systems Relay Valve (Air Start) - Remove and Install
583R Pipelayer Machine Systems Bottom Guard - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Electric Starting Motor - Remove and Install
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Tank (Rear)