 | |
| Illustration 1 | g00565587 |
| Parking Brake - The parking brake switch will illuminate when the parking brake is applied. The light will remain illuminated if the parking brake switch is pulled up in order to release the brake and the propel lever is not in the STOP position. In order to move the machine, the propel lever must be in the STOP position before the parking brake is released. |
 | |
| Illustration 2 | g00565782 |
| Alternator (1) - The lamp illuminates when the alternator is malfunctioning. If the indicator illuminates, stop the machine in a safe area. Investigate the cause of the problem. Check for a loose belt or a broken belt. Repair the problem before you use the machine. |
| Engine Oil Pressure (2) - The light illuminates when the engine oil pressure is low or there is a malfunction of the system. |
If the engine oil pressure light illuminates and there is an audible alarm, stop the engine. Investigate the cause of the alarm. Do not operate the machine until the cause of the alarm has been repaired.
| Engine Coolant Temperature (3) - The light indicates overheating of the engine coolant or a malfunction of the system. |
If the light for the engine coolant temperature illuminates and there is an audible alarm, stop the machine in a convenient area. Investigate the cause of the alarm. Do not operate the machine until the cause of the alarm has been repaired.
| Hydraulic Oil Temperature (4) - The light will illuminate if the hydraulic oil in the hydraulic tank is too hot. |
If the light for the hydraulic temperature illuminates, stop the machine. Move the throttle switch to low idle. Allow the machine to idle for a few minutes. Resume using the machine if the temperature returns to the normal temperature. If the temperature remains above normal, stop the machine. Investigate the cause of the alarm. Do not operate the machine until the cause of the alarm has been repaired.
| Hydraulic Oil Pressure (5) - The light indicates low hydraulic oil pressure. |
If the light illuminates and an audible alarm sounds, stop the machine. Check the indicators on the hydraulic system. If necessary, change the filters. Investigate the system for other problems if changing the filters does not correct the problem. Do not operate the machine until the problem has been repaired.
 | |
| Illustration 3 | g00734585 |
Indicator lights | |
Water Spray System (6) - The light illuminates when the water spray system is turned ON.
Vibratory System (7) - The light illuminates when the vibration system is turned ON.
Machine Lighting (8) - The light illuminates when the machine lights are turned ON.
Directional Turn Signal (9) - The directional turn signals are optional equipment. The light illuminates when one of the directional turn signals is activated.