CID 500 FMI 12 EMCP Electronic Control (Generator Set) Failed - Test
A CID 500 FMI 12 means that the GSC is unable to accurately measure the AC voltage and the AC current. The engine remains able to run. The engine also remains able to start.
Note: On the GSC, the CID 500 FMI 12 will be shown even when the engine control switch (ECS) is in the OFF/RESET position.
Procedure
If a CID 500 FMI 12 occurs, replace the GSC. See Testing And Adjusting, "EMCP Electronic Control (Generator Set) - Replace".
Show/hide table
| NOTICE |
|---|
If a CID 500 FMI 12 occurs and the engine is running, the generator output may be at full voltage potential. This could occur even if the GSC display is showing 0 AC volts and 0 AC current for all three phases. |
Caterpillar Information System:
789C Off-Highway Truck Air System and Brakes Service and Parking Brake (Front)
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Steering and Brake Manifold Valve - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Pump (Hydrostatic) - Install
D250E Series II and D300E Series II Articulated Trucks Steering Frame Lock
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Pump (Hydrostatic) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Trunnion - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Hydraulic System Operation
3406E On-Highway Engine Electronic Unit Injector Sleeve - Remove
3406E On-Highway Engine Electronic Unit Injector Sleeve - Install
3306C Engines for Caterpillar Built Machines Engine Design
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Front Support - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Relief Valve (Main)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Pump (Hydrostatic) - Disassemble
789C Off-Highway Truck Air System and Brakes Service and Parking Brake (Rear)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Warning Operation
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Parameters
3406C Engines for Caterpillar Built Machines Camshaft
3406C Engines for Caterpillar Built Machines Cylinder Head Valves
D250E Series II and D300E Series II Articulated Trucks Shipping the Machine
24H Motor Grader Braking System Accumulator Charging Valve
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Radiator - Disassemble
AP-1000B and BG-260C Asphalt Pavers Engine Air Filter Secondary Element - Replace
D250E Series II and D300E Series II Articulated Trucks Roading the Machine
D250E Series II and D300E Series II Articulated Trucks Lifting and Tying Down the Machine