Electronic Unit Injector Sleeve - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| B | 9U-6862 | 锥形碳刷 | 1 |
| 9U-6863 | 小号孔刷 | 1 | |
| 9U-7244 | 底刷 | 1 | |
| 9U-7237 | 刷子扩展工具 | 1 | |
| 4C-5552 | 大号膛刷 | 1 | |
| C (1) | 221-9778 | 拉拔器螺柱 | 1 |
| D (1) | 9U-7258 | 驱动装置盖 | 1 |
| E | 4C-9507 | 挡圈固定胶 | - |
Show/hide table
| ( 1 ) | 9U-6891 喷油器工具总成 的部分工具 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (B) 清洁缸盖中单体喷油器套管的孔。
- 将新的 O 形密封圈 (2) 安装到单体喷油器套管 (1) 上。
Show/hide table
| 注意 |
|---|
开始安装之前，请确保单体喷油器套管及单体喷油器套管的缸盖孔完全没有油、 污垢和密封剂碎屑。 |
Show/hide table
 | |
| 图 1 | g01003258 |
- 将工具 (E) 涂抹在接触面上标有 (X) 的位置。
注: 请勿将工具 (E) 涂抹到缸盖表面。 仅在单体喷油器套管上涂抹工具 (E) 。
- 用清洁的发动机机油润滑 O 形密封圈 (2) 。
- 将工具 (C) 拧入单体喷油器套管 (1) 的螺纹。
- 将工具 (C) 和单体喷油器套管 (1) 放入缸盖中。 小心不要损坏单体喷油器套管上的 O 形密封圈。
- 使用工具 (D) 和锤子安装单体喷油器套管。
Show/hide table
| 注意 |
|---|
确保单体喷油器套管正确放入缸盖中。 当单体喷油器套管完全放入缸盖的孔中时，工具和单体喷油器套管将变成"环状"。 |
Show/hide table
 | |
| 图 2 | g01027804 |
- 使用清洁的毛巾擦除任何多余的固定剂。
- 向冷却系统加注冷却液。 请参阅操作和保养, "加注容量"以了解冷却系统容量。
End By: 安装电子单体喷油器。 请参阅 拆解和组装电子单体喷油器, "- 安装"。
Caterpillar Information System:
3306C Engines for Caterpillar Built Machines Engine Design
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Front Support - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Relief Valve (Main)
793C Off-Highway Truck Machine Systems Cab - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Model Views and Specifications
24H Motor Grader Braking System General Information
AP-1050B and BG-245C Asphalt Pavers Conveyor Systems Hydraulic Oil Filter (Return)
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Steering Control - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Steering Control - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Air/Hydraulic Cylinder (Rear Brake) - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Steering Motor - Disassemble
3406E On-Highway Engine Electronic Unit Injector Sleeve - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Hydraulic System Operation
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Trunnion - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Pump (Hydrostatic) - Remove
D250E Series II and D300E Series II Articulated Trucks Steering Frame Lock
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Pump (Hydrostatic) - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Steering and Brake Manifold Valve - Test
789C Off-Highway Truck Air System and Brakes Service and Parking Brake (Front)
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 500 FMI 12 EMCP Electronic Control (Generator Set) Failed - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Pump (Hydrostatic) - Disassemble
789C Off-Highway Truck Air System and Brakes Service and Parking Brake (Rear)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Warning Operation