Ether Starting Aid Cylinder - Replace
- Raise the hood. The ether starting aid cylinder is mounted on the front left side of the engine compartment.
- Loosen cylinder retaining clamp (1). Unscrew and discard empty ether starting aid cylinder (2) .
Show/hide table
 | |
| Illustration 1 | g00601490 |
- Remove gasket (3). Install a new gasket. A new gasket is provided with each new ether starting aid cylinder.
- Install a new ether starting aid cylinder. Tighten the ether starting aid cylinder hand tight. Tighten the cylinder retaining clamp securely.
- Lower the hood.
Caterpillar Information System:
D250E Series II and D300E Series II Articulated Trucks Engine Oil and Filter - Change
24H Motor Grader Power Train Transmission Lubrication
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Snapshot Trigger - Configure
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Vibratory System Hydraulic Tank
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Multifunction Valves
D250E Series II and D300E Series II Articulated Trucks Engine Oil Level - Check
D250E Series II and D300E Series II Articulated Trucks Engine Crankcase Breather - Clean
966G Wheel Loader and 972G Wheel Loader Power Train Electrical Service Tools
D250E Series II and D300E Series II Articulated Trucks Engine Air Precleaner - Clean
AP-1050B and BG-245C Asphalt Pavers Conveyor Systems Conveyor Planetary Drive (Auger)
D350E Series II and D400E Series II Articulated Trucks After Starting Engine
D250E Series II and D300E Series II Articulated Trucks Starting with Auxiliary Start Receptacle
D250E Series II and D300E Series II Articulated Trucks Fan Drive Bearing - Lubricate
D250E Series II and D300E Series II Articulated Trucks Frame and Body - Inspect
789B Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
D250E Series II and D300E Series II Articulated Trucks Fuel System - Prime
D250E Series II and D300E Series II Articulated Trucks Fuel System Primary Filter - Clean/Inspect/Replace
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Hydraulic System
784C and 785C Off-Highway Truck/Tractors Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
D250E Series II and D300E Series II Articulated Trucks Fuel System Secondary Filter - Replace
AP-1050B and BG-245C Asphalt Pavers Conveyor Systems Conveyor Planetary Drive (Drag)
3306C Engines for Caterpillar Built Machines Fuel Injection Pump
D250E Series II and D300E Series II Articulated Trucks Fuel Tank Cap and Strainer - Clean
D250E Series II and D300E Series II Articulated Trucks Fuel Tank Water and Sediment - Drain