 | |
| Illustration 1 | g01055669 |
(1) Apply a light film of oil onto the 9S-7950 Bearing Cone.
(2) Apply a light film of oil onto the 9S-7949 Bearing Cup.
(3) Apply a light film of oil onto the 030-0060 Bearing Cup.
(4) Apply a light coat of the 1P-0808 Multipurpose Grease onto the 8C-7768 Washer.
(5) Apply a light film of oil onto the 086-9743 Cluster Gear.
(6) Apply a light coat of the 5P-3413 Pipe Sealant onto the 7H-3171 Pipe Plug.
(7) Apply a light coat of the 5P-3413 Pipe Sealant onto the 9X-0881 Plug.
(8) Apply a light coat of the 1P-0808 Multipurpose Grease onto the 9X-0785 Bearing.
(9) Apply a light film of oil onto the 086-9744 Input Gear.
(10) Tighten four 9X-0880 Shoulder Bolt to the following torque. ... 31 N·m to 37 N·m (23 lb ft to 27 lb ft)
(11) Tighten eight 8T-8912 Bolt to the following torque. ... 31 N·m to 37 N·m (23 lb ft to 27 lb ft)
(12) Apply a light coat of the 1P-0808 Multipurpose Grease onto the 9X-0876 O-Ring Seal.
(13) Tighten 8C-8139 Locknut to the following torque. ... 88 N·m (65 lb ft)
(14) Apply a light film of oil onto the 030-0061 Bearing Cone.