 | |
| Illustration 1 | g01054784 |
(1) Tighten eight 9X-0880 Bolts to the following torque. ... 34 ± 2.7 N·m (25 ± 2 lb ft)
(2) Tighten the four 8T-8912 Bolts to the following torque. ... 34 ± 2.7 N·m (25 ± 2 lb ft)
(3) Apply a light coat of oil onto the 7K-8877 Bearing Cone.
(4) Apply 5P-3413 Pipe Sealant onto 7M-7410 Plug.
(5) Apply a light coat of oil onto the 8C-7771 Gear.
(6) Apply 5P-3413 Pipe Sealant onto 7H-3171 Pipe Plug.
(7) Apply 1P-0808 Multipurpose Grease onto 9X-0875 Thrust Washer.
(8) Apply a light coat of oil onto the 8C-7472 Carrier.
(9) Apply 1P-0808 Multipurpose Grease onto 9X-0876 O-Ring Seal.
(10) Apply a light coat of oil onto the 086-9744 Input Gear.
(11) Reduction Ratio ... 19.25:1
(12) Apply a light coat of oil onto the 7K-8876 Bearing Cup.
(13) Apply a light coat of oil onto the 7K-5448 Bearing Cup.
(14) Apply a light coat of oil onto the 7K-5449 Bearing Cone.