Oil Cooler (Hoist and Rear Brake) - Remove
Start By:
- Remove the oil cooler (power train). Refer to Disassembly and Assembly, "Oil Cooler (Power Train) - Remove".
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Plug and cap all connections in order to prevent contamination.
Show/hide table
Illustration 1 g00560953 - Remove oil tube assembly (1), the gasket and the O-ring seal. Secure a lifting sling to the hoist and rear brake oil cooler. Fasten the lifting sling to a hoist.
Show/hide table
Illustration 2 g00560959 - Remove four bolts (4) and the hard washers. Remove O-ring seal (3) (not shown) and elbow (5) from hoist and rear brake oil cooler (2).
Show/hide table
Illustration 3 g00560987 - Disconnect hose assembly (6), adapter (7) and the O-ring seal from hoist and rear brake oil cooler (2).
- Remove six bolts (8) from the bonnet. Remove hoist and rear brake oil cooler (2), and gasket (9) from the engine. The weight of the hoist and rear brake oil cooler (2) is
50 kg (112 lb) .
Caterpillar Information System:
3306C Engines for Caterpillar Built Machines Ether Starting Aid
572R Pipelayer Hydraulic System Combination Valves
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Oil Cooler - Install
572R Pipelayer Hydraulic System Boom
AP-1055B and BG-2455C Asphalt Pavers Screed Hoist Control
572R Pipelayer Hydraulic System Pipelayer Frame Group
Electronic Modular Control Panel II (EMCP II) For MUI Engines Indicator for Engine Overspeed - Troubleshoot
69D and 769D Off-Highway Trucks and 771D Quarry Truck Electronic Control Module (Engine) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Cooling System Pressure Relief Valve - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Turbocharger - Install
572R Pipelayer Hydraulic System Counterweight Group
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Oil Cooler (Hoist and Rear Brake) - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Front Support - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Fan Drive - Remove
IT14G Integrated Toolcarrier Window Wiper - Inspect/Replace
572R Pipelayer Hydraulic System Load Sense Manifold
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Control Valve
Electronic Modular Control Panel II (EMCP II) For MUI Engines Troubleshooting Undiagnosed Problems
789C Off-Highway Truck/Tractor Gear Pump (Transmission)
517 Track-Type Skidder Hydraulic System Testing and Adjusting
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Hydraulic Tank - Install
G3B, K3A and L3A Denso Alternators Alternator - Assemble
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Engine Air Filter Primary Element - Clean/Replace