Fuel System Water Separator - Drain
Show/hide table
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. |
Show/hide table
Illustration 1 | g00467033 |
(1) Vent valve
(2) Base (3) Can (4) Element (5) Drain plug |
Water in the fuel can cause fuel system components to fail. Drain the water separator daily. Drain the water separator more frequently when a large concentration of water is present in the fuel system.
- Close the fuel supply valve.
Show/hide table
NOTICE Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
- Remove drain plug (5). Depress vent valve (1) in order to start the flow. Allow the water to drain into a suitable container. Allow the water to flow until fuel flows from the drain.
- Install the drain plug. Dispose of the liquid properly.
- Open the fuel supply valve.
Show/hide table
NOTICE |
---|
The water separator is under suction during normal engine operation. Ensure that the drain valve is tightened securely to help prevent air from entering the fuel system. |
Caterpillar Information System:
793C Off-Highway Truck Machine Systems Gear Pump (Brake Release and Oil Cooling) - Assemble
65E, 75E, 85E and 95E Agricultural Tractors Windshield Wiper and Washer Control
65E, 75E, 85E and 95E Agricultural Tractors Warning Alarm
D250E Series II and D300E Series II Articulated Trucks Circuit Breakers - Reset
D250E Series II and D300E Series II Articulated Trucks Cab Air Filter - Clean/Replace
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake Control - Adjust
793C Off-Highway Truck Machine Systems Gear Pump (Brake Release and Oil Cooling) - Disassemble
D7R Track-Type TractorPower Train Track Roller Frame
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Lift Cylinder - Install
65E, 75E, 85E and 95E Agricultural Tractors Safety Signs and Labels
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake - Manual Release
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System General Information
D6R Track-Type Tractor Power Train Track Idler
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Vibratory Electrical System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Lift Kickout Positioner - Adjust
D250E Series II and D300E Series II Articulated Trucks Cooling System Coolant (DEAC) - Change
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Additional Reference Material
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Attachment Positioner - Adjust
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Pressure Reducing Valve (Back Pressure)
D7R Track-Type TractorPower Train Track Carrier Roller
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Charge Pump
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Kickout System - Integrated Toolcarriers
D250E Series II and D300E Series II Articulated Trucks Cooling System Coolant (ELC) - Change
980G Wheel Loader Braking System Accumulator Charging Valve (Brake)