Troubleshooting - Implement Hydraulic System
The Complete Hydraulic System Does Not Operate
Show/hide table
The Complete Hydraulic System Does Not Operate.     | |
---|---|
Cause     | Solution     |
The hydraulic system oil level is low.     | Check the hydraulic system oil level. If the oil level is low, add oil.     |
The hydraulic oil filters are restricted.     | Replace the hydraulic oil filters.     |
The hydraulic system is malfunctioning.     | Consult any CLAAS dealer.     |
The Hydraulic Oil Overheats
Show/hide table
The Hydraulic Oil Overheats.     | |
---|---|
Cause     | Solution     |
The hydraulic system oil level is low or the hydraulic system oil level is high.     | Check the hydraulic system oil level. If necessary, adjust the oil level.     |
The radiator screen, the oil cooler, or the radiator is plugged.     | Clean the radiator screen, the oil cooler, and the radiator.     |
The hydraulic oil filters are plugged.     | Replace the hydraulic oil filters.     |
The flow control is not properly adjusted.     | Adjust the flow control in order to lower the flow.     |
The hydraulic load or the hydraulic motor is not matched to the machine.     | Consult any CLAAS dealer.     |
The Hoses Will Not Couple
Show/hide table
The Hoses Will Not Couple.     | |
---|---|
Cause     | Solution     |
You are using the incorrect male connectors.     | Replace the connectors with SAE standard connectors or with ISO standard connectors. These connectors are available from any CLAAS dealer.     |
The Implement Valve Detent Disengages Prematurely
Show/hide table
The Implement Valve Detent Disengages Prematurely.     | |
---|---|
Cause     | Solution     |
The detent kickout pressure is set too low.     | Adjust the detent kickout pressure.     |
The hydraulic hoses are too small.     | Use hoses that have a larger diameter.     |
The flow controls are not set properly.     | Turn the flow controls to the proper setting.     |
The Remote Attachment Does Not Operate
Show/hide table
The Remote Attachment Does Not Operate.     | |
---|---|
Cause     | Solution     |
The hoses are not completely connected.     | Correctly attach the hoses.     |
The hydraulic load exceeds the capacity of the system.     | Reduce the hydraulic load or use the correct size of cylinder.     |
The lockout is restricting the movement of the implement control lever.     | Reposition the lockout.     |
The Implement Raises Too Slowly or the Implement Lowers Too Slowly
Show/hide table
The Implement Raises Too Slowly or the Implement Lowers Too Slowly.     | |
---|---|
Cause     | Solution     |
The flow controls are not set properly.     | Turn the flow controls to the proper setting.     |
The hydraulic load exceeds the capacity of the system.     | Reduce the hydraulic load or use the correct size of cylinder.     |
Caterpillar Information System:
938G Wheel Loader and IT38G Integrated Toolcarrier Braking System Service Brake Control (Pedals) - Adjust
789B Off-Highway Truck Maintenance Interval Schedule
784B and 785B Off-Highway Truck/Tractors Maintenance Interval Schedule
65E, 75E, 85E and 95E Agricultural Tractors Troubleshooting - Engine
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Cylinder (Lift, Tilt and Steering) - Assemble
65E, 75E, 85E and 95E Agricultural Tractors Fire Extinguisher - Inspect
D250E Series II and D300E Series II Articulated Trucks Braking System - Test
D250E Series II and D300E Series II Articulated Trucks Brake Pads - Check
D250E Series II and D300E Series II Articulated Trucks Body Pivot Bearings - Lubricate
D250E Series II and D300E Series II Articulated Trucks Battery Electrolyte Level - Check
D250E Series II and D300E Series II Articulated Trucks Backup Alarm - Test
3208 Marine Engine Crankshaft Vibration Damper - Inspect
65E, 75E, 85E and 95E Agricultural Tractors Troubleshooting - Steering
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Diverter Valve (Ride Control)
D7R Track-Type Tractor Power Train Steering and Transmission Control
793C Off-Highway Truck Machine Systems Evaporator Coil - Remove and Install
793C Off-Highway Truck Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Oil Cooler - Remove
65E, 75E, 85E and 95E Agricultural Tractors Hydraulic Oil
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Vibratory Tachometer - Adjust
65E, 75E, 85E and 95E Agricultural Tractors Sampling Interval and Location of Sampling Valve
793C Off-Highway Truck Machine Systems Blower Motor (Air Conditioner, Heater) - Install
793C Off-Highway Truck Machine Systems Resistor (Cab Fan Speed) - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs