938G Wheel Loader and IT38G Integrated Toolcarrier Braking System Caterpillar


Service Brake Control (Pedals) - Adjust

Usage:

IT38G 1CW



Illustration 1g00274741

(1) Locknut. (2) Control rod. (3) Locknut. (4) Roller. (5) Brake valve.




Illustration 2g00284768

(6) Bolts. (7) Plate.

  1. Loosen two bolts (6) .

  1. Slide plate (7) until dimension (A) equals 135.0 mm (5.30 inch). Dimension (A) is measured from the bottom edge of the brake pedal to the metal floor of the cab.

  1. Tighten two bolts (6) .

  1. Loosen locknuts (1) and (3) .

  1. Turn control rod (2) until there is a small clearance between roller (4) and brake valve (5) . The small clearance should provide approximately 2.0 mm (.08 inch) of brake pedal travel between roller (4) and the top of brake valve (5) .

    Note: When control rod (2) is turned in order to obtain free play at the brake pedal, make sure that the thread engagement is sufficient. The thread engagement of control rod (2) should be 10.0 mm (.40 inch) or more on both ends.

  1. Tighten locknuts (1) and (3) .

Caterpillar Information System:

789B Off-Highway Truck Maintenance Interval Schedule
784B and 785B Off-Highway Truck/Tractors Maintenance Interval Schedule
65E, 75E, 85E and 95E Agricultural Tractors Troubleshooting - Engine
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Cylinder (Lift, Tilt and Steering) - Assemble
65E, 75E, 85E and 95E Agricultural Tractors Fire Extinguisher - Inspect
D250E Series II and D300E Series II Articulated Trucks Braking System - Test
D250E Series II and D300E Series II Articulated Trucks Brake Pads - Check
D250E Series II and D300E Series II Articulated Trucks Body Pivot Bearings - Lubricate
D250E Series II and D300E Series II Articulated Trucks Battery Electrolyte Level - Check
D250E Series II and D300E Series II Articulated Trucks Backup Alarm - Test
3208 Marine Engine Crankshaft Vibration Damper - Inspect
65E, 75E, 85E and 95E Agricultural Tractors Engine Air Filter Secondary Element - Replace
65E, 75E, 85E and 95E Agricultural Tractors Troubleshooting - Implement Hydraulic System
65E, 75E, 85E and 95E Agricultural Tractors Troubleshooting - Steering
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Diverter Valve (Ride Control)
D7R Track-Type Tractor Power Train Steering and Transmission Control
793C Off-Highway Truck Machine Systems Evaporator Coil - Remove and Install
793C Off-Highway Truck Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Oil Cooler - Remove
65E, 75E, 85E and 95E Agricultural Tractors Hydraulic Oil
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Vibratory Tachometer - Adjust
65E, 75E, 85E and 95E Agricultural Tractors Sampling Interval and Location of Sampling Valve
793C Off-Highway Truck Machine Systems Blower Motor (Air Conditioner, Heater) - Install
793C Off-Highway Truck Machine Systems Resistor (Cab Fan Speed) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.