Tire Inflation - Check
Show/hide table
| |
| Illustration 1 | g00613047 |
If necessary, inflate the tires.
For normal operating conditions, inflate the tires to the proper pressure:
- The proper pressure for the CP-563D is
110 kPa (16 psi) . - The proper pressure for the CS-563D, CS-573D, and CS-583D is
83 kPa (12 psi) .
The tire inflation pressure is based on the weight of a machine that is ready to work and the machine is without attachments. The pressure is based on the rated payload, and in average operating conditions. Pressures for each application may vary. Consult your Caterpillar dealer for more information about proper tire inflation pressures.
Caterpillar Information System:
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Steering Cylinder Ends - Lubricate
572R Pipelayer Arctic Lubricants
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Power Train Electronic Control Module (ECM)
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Rollover Protective Structure (ROPS) - Inspect
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Glossary of Electrical Terms
938G Wheel Loader and IT38G Integrated Toolcarrier Fire Extinguisher Location
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Radiator Core - Clean
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System General Information
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Delimbing Knife Cylinder
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Position Sensor (Transmission Gear) - Remove and Install
527 Track-Type Skidder Power Train Transmission
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Neutral Start Switch - Test
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Belts - Inspect/Adjust/Replace
3176C and 3196 Engines for Caterpillar Built Machines Lubrication System
24H Motor Grader Automatic Lubrication System Timer (Cycle) - Adjust
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Specifications
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering Frame Lock - Separate and Connect
631E Series II Wheel Tractor-Scrapers Fuel Injection Timing - Check
988G Wheel Loader Steering System Steering Turn Stop - Adjust
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Walk-Around Inspection
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cylinder Block
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555} Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
793C Off-Highway Truck Machine Systems Air Relief Valve (Air Tank) - Remove and Install
527 Track-Type Skidder Power Train Transmission Lubrication