3034 Engine for Caterpillar Built Machines Caterpillar


Engine Design

Usage:

3034 3NW

3034 Engine




Illustration 1g00774292

Cylinder and valve location

(A) Exhaust valve

(B) Inlet valve

(C) Flywheel end of the engine

(D) Front of the engine

Bore ... 97.0 mm (3.82 inch)

Stroke ... 100 mm (3.94 inch)

Displacement ... 3 liters (183 in 3 )

Cylinder arrangement ... In-line

Type of combustion ... Direct injection

Compression Ratio ... 17.5:1

Number of cylinders ... 4

Valves per cylinder ... 2

Valve lash

Inlet valve ... 0.35 mm (0.014 inch)
Exhaust valve ... 0.35 mm (0.014 inch)

Firing order ... 1, 3, 4, 2

When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction: ... Clockwise

When the camshaft is viewed from the front of the engine, the camshaft rotates in the following direction: ... Clockwise

The front of the engine is opposite the flywheel end of the engine. The left side and the right side of the engine are determined from the flywheel end. Number 1 cylinder is the front cylinder of the engine.

Caterpillar Information System:

789B Off-Highway Truck Power Train Rear Wheel Bearing - Adjust
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Inching Clutch Control
789C Off-Highway Truck Power Train Rear Axle Housing End Play - Adjust
CP-563C and CS-563C Vibratory Compactors Engine Water Pump - Inspect
C15 and C18 Petroleum Generator Sets Overhaul Considerations
572R Pipelayer Power Train Pivot Bar
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Battery - Inspect
572R Pipelayer After Starting Engine
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Powershift Transmission Controls
572R Pipelayer Starting with Auxiliary Start Receptacle
CP-563C and CS-563C Vibratory Compactors Engine Mounts - Inspect
789C Off-Highway Truck Power Train Differential and Bevel Gear - Adjust
572R Pipelayer Parking Brake Control
572R Pipelayer Power Train Idlers (Track)
3034 Engine for Caterpillar Built Machines General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Service Brake
572R Pipelayer Transmission Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Autoshift
CP-563C and CS-563C Vibratory Compactors Propel Pump Linkage Rod - Lubricate
561M Pipelayer Hook Control
784B and 785B Off-Highway Truck/Tractors Retarding Information and Conditions
CP-563C and CS-563C Vibratory Compactors Radiator Core - Clean
IT14G Integrated Toolcarrier Starting with Auxiliary Start Receptacle
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Shuttle Shifting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.