572R Pipelayer Power Train Caterpillar

Illustration 1	g01027457

(1) Diameter of the bearing after assembly ... 160.30 ± 0.078 mm (6.311 ± 0.003 inch)

(1) Diameter of the pivot shaft in the bearing area ... 160.00 ± 0.08 mm (6.299 ± 0.003 inch)

(2) Diameter of the bearing after assembly ... 171.82 ± 0.078 mm (6.764 ± 0.003 inch)

(2) Diameter of the pivot shaft in the bearing area ... 171.50 ± 0.08 mm (6.752 ± 0.003 inch)

Note: The bearing must be flush with the bore.

(3) Apply 4C-9507 Retaining Compound on both the inner diameter and the outer diameter of the seal and the outer retainer and the inner retainer prior to installing the seal.