IT14G Integrated Toolcarrier Caterpillar


Stopping the Engine

Usage:

IT14G 1WN


NOTICE

Stopping the engine immediately after it has been working under load, can result in overheating and accelerated wear of the engine components.

Refer to the following procedure, to allow the engine to cool, and to prevent excessive temperatures in the turbocharger housing (if equipped), which could cause oil coking problems.


  1. Operate the engine for five minutes at low idle with no load.

    This allows hot areas in the engine to cool gradually. This will extend the engine life.




    Illustration 1g00412245

  1. Turn the engine start switch key to the OFF position in order to stop the engine.

  1. Move all hydraulic control levers back and forth in order to relieve hydraulic pressure.

  1. Move all hydraulic control levers into the HOLD position.

Caterpillar Information System:

IT14G Integrated Toolcarrier Stopping the Engine if an Electrical Malfunction Occurs
IT14G Integrated Toolcarrier Steering Cylinder Bearings - Lubricate
IT14G Integrated Toolcarrier Starting Below 0°C (32°F) with Thermal Starting Aid
793C Off-Highway Truck Machine Systems Piston Pump (Steering) - Assemble
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Refill Capacities
IT14G Integrated Toolcarrier Shipping the Machine
3406E Truck Engine Engine Oil Pump
IT14G Integrated Toolcarrier Rollover Protective Structure (ROPS) - Inspect
784B and 785B Off-Highway Truck/Tractors Hoist, Torque Converter and Brake Tank Suction Screen - Inspect, Clean and Replace
572R Pipelayer Power Train Steering Clutches and Brakes
572R Pipelayer Seat Adjustment
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Air Conditioner Drain Line - Clean
IT14G Integrated Toolcarrier Stopping the Machine
561M Pipelayer Adjustable Armrest
3406E and 3456 Industrial Engines Engine Oil Filler
IT14G Integrated Toolcarrier Tire Shipping Pressure
65E, 75E, 85E and 95E Agricultural Tractors Air Conditioner - Test
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Parking
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Walk-Around Inspection
793B Off-Highway Truck Power Train Torque Converter Lockup Clutch Maximum Pressure - Test
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Walk-Around Inspection
784B and 785B Off-Highway Truck/Tractors Automatic Retarder
789B Off-Highway Truck Automatic Retarder
3406E and 3456 Industrial Engines Fan Drive
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.