IT14G Integrated Toolcarrier Caterpillar


Starting Below 0°C (32°F) with Thermal Starting Aid

Usage:

IT14G 1WN

------ WARNING! ------

Do not use aerosol types of starting aids such as ether. Such use could result in an explosion and personal injury.

----------------------

  1. Engage the parking brake.

  1. Move the direction control lever or move the direction control switch (if equipped) into NEUTRAL.

  1. Move the control levers to the HOLD position.

  1. Turn the engine start switch key to the ON position. Pause for three seconds for the secondary steering self-test (if equipped).



    Illustration 1g00414598

  1. Depress the top of the thermal starting aid switch. The light bar inside the switch will light.



    Illustration 2g00412245

  1. Wait until the light bar inside the switch goes out. Turn the engine start switch key in order to engage the starter motor. Do not crank the engine for more than 15 seconds.

  1. If the engine does not start, release the engine start switch key in order to disengage the starter motor. Repeat Steps 5 and 6.

    When the engine starts, continue to depress the starting aid switch until the engine runs evenly. Do not depress the starting aid switch for more than 30 seconds after the engine starts.

Caterpillar Information System:

793C Off-Highway Truck Machine Systems Piston Pump (Steering) - Assemble
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Refill Capacities
IT14G Integrated Toolcarrier Shipping the Machine
3406E Truck Engine Engine Oil Pump
IT14G Integrated Toolcarrier Rollover Protective Structure (ROPS) - Inspect
784B and 785B Off-Highway Truck/Tractors Hoist, Torque Converter and Brake Tank Suction Screen - Inspect, Clean and Replace
572R Pipelayer Power Train Steering Clutches and Brakes
572R Pipelayer Seat Adjustment
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Air Conditioner Drain Line - Clean
IT14G Integrated Toolcarrier Radiator Core - Clean
789B Off-Highway Truck Hoist, Torque Converter and Brake Tank Suction Screen - Inspect, Clean and Replace
789B Off-Highway Truck Truck Payload Measurement System (TPMS)
IT14G Integrated Toolcarrier Steering Cylinder Bearings - Lubricate
IT14G Integrated Toolcarrier Stopping the Engine if an Electrical Malfunction Occurs
IT14G Integrated Toolcarrier Stopping the Engine
IT14G Integrated Toolcarrier Stopping the Machine
561M Pipelayer Adjustable Armrest
3406E and 3456 Industrial Engines Engine Oil Filler
IT14G Integrated Toolcarrier Tire Shipping Pressure
65E, 75E, 85E and 95E Agricultural Tractors Air Conditioner - Test
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Parking
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Walk-Around Inspection
793B Off-Highway Truck Power Train Torque Converter Lockup Clutch Maximum Pressure - Test
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Walk-Around Inspection
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.