IT14G Integrated Toolcarrier Caterpillar


Radiator Core - Clean

Usage:

IT14G 1WN



Illustration 1g00387726



Illustration 2g00448380

  1. Open the engine access door on the back side of the machine. Use the prop rod to hold the engine access door open. The radiator assembly is located on the left side of the engine compartment.



    Illustration 3g00409138



    Illustration 4g00409144

  1. Unlatch the two latches (1) for the hydraulic oil cooler (2). Swing the hydraulic oil cooler away from the radiator (3) in order to clean the radiator and the hydraulic oil cooler.



    Illustration 5g00101939

  1. You can use compressed air, high pressure water, or steam to remove dust and other debris from the radiator fins. However, the use of compressed air is preferred.

  1. Swing the hydraulic oil cooler back into the operating position and latch the two latches.

  1. Close the engine access door.

Caterpillar Information System:

789B Off-Highway Truck Hoist, Torque Converter and Brake Tank Suction Screen - Inspect, Clean and Replace
789B Off-Highway Truck Truck Payload Measurement System (TPMS)
C15 and C18 Petroleum Generator Sets Ether Starting Aid Cylinder - Replace - If Equipped
784B and 785B Off-Highway Truck/Tractors Truck Payload Measurement System (TPMS)
IT14G Integrated Toolcarrier Parking Brake Manual Release
572R Pipelayer Backup Alarm
IT14G Integrated Toolcarrier Lubricant Viscosities
572R Pipelayer Power Train Final Drive
IT14G Integrated Toolcarrier Hydraulic System Oil Level - Check
IT14G Integrated Toolcarrier Hydraulic System Oil Filter - Replace
IT14G Integrated Toolcarrier Fuel Tank Cap - Clean
IT14G Integrated Toolcarrier Fuel System Water Separator Element - Replace
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Air Conditioner Drain Line - Clean
572R Pipelayer Seat Adjustment
572R Pipelayer Power Train Steering Clutches and Brakes
784B and 785B Off-Highway Truck/Tractors Hoist, Torque Converter and Brake Tank Suction Screen - Inspect, Clean and Replace
IT14G Integrated Toolcarrier Rollover Protective Structure (ROPS) - Inspect
3406E Truck Engine Engine Oil Pump
IT14G Integrated Toolcarrier Shipping the Machine
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Refill Capacities
793C Off-Highway Truck Machine Systems Piston Pump (Steering) - Assemble
IT14G Integrated Toolcarrier Starting Below 0°C (32°F) with Thermal Starting Aid
IT14G Integrated Toolcarrier Steering Cylinder Bearings - Lubricate
IT14G Integrated Toolcarrier Stopping the Engine if an Electrical Malfunction Occurs
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.