Steering Cylinder (Left Side) - Install
Installation Procedure
- Use two people to install steering cylinder (5). The weight of the steering cylinder is 34 kg (75 lb).
Show/hide table
 | |
| Illustration 1 | g00357314 |
- Install pin (7), the washer, and bolt (6) in the rod end of steering cylinder (5) .
- Install pin (4), the washer, and bolt (3) in the rod end of steering cylinder (5) .
Show/hide table
 | |
| Illustration 2 | g00357312 |
- Connect grease line (2) .
- Install two hydraulic hose assemblies (1) .
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
784B Tractor and 785B Off-Highway Truck Power Train Transmission Hydraulic System
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove
784B Tractor and 785B Off-Highway Truck Power Train Pressure Switch (Service Brake and Retarder)
572R Pipelayer Power Train Hydraulic System
793B Off-Highway Truck Air System and Brakes Screen (Torque Converter and Front Brake Cooling)
789B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Cylinder (Left Side) - Remove
517 Track-Type Skidder Track Adjustment - Adjust
550, 570 and 580 Wheel Harvesters Boom and Stick Linkage - Lubricate
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Install
784B Tractor and 785B Off-Highway Truck Power Train Torque Converter Hydraulic System
784B Tractor and 785B Off-Highway Truck Power Train Pressure Switch (Secondary Brake and Parking Brake)
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Cylinder (Right Side) - Remove
517 Track-Type Skidder Fan Drive Bearing - Lubricate
3306C Engines for Caterpillar Built Machines Piston and Rings
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Cylinder (Right Side) - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Install
527 Track-Type Skidder Air Conditioner Belt - Inspect/Adjust/Replace - If Equipped
966G Wheel Loader and 972G Wheel Loader Power Train Troubleshooting Backup Alarm
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Disassemble
572R Pipelayer General Information
517 Track-Type Skidder Alternator and Fan Belts - Inspect/Adjust/Replace
572R Pipelayer Steering and Brake Control Valve
572R Pipelayer Priority Valve