966G Wheel Loader and 972G Wheel Loader Machine Systems Caterpillar

Removal Procedure

Start By:

1. Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".

1. Move the seat all the way toward the front.
   Show/hide table

   Illustration 1	g00357381

2. Remove six screws (2) and interior trim (1) from the rear of the cab.
   Show/hide table

   Illustration 2	g00357384

3. Disconnect electrical connector (4) from wiper motor assembly (3).
   Show/hide table

   Illustration 3	g00357385

4. Disconnect hose (6). Open cover (5).
   Show/hide table

   Illustration 4	g00357386

5. Remove nut (8) and the lock washers. Remove wiper arm assembly (7).
   Show/hide table

   NOTICE
   Damage may occur to the splines on the wiper arm assembly during removal. Replacement of the wiper arm assemblies is recommended to ensure that the splines are properly formed to the shaft.

   Show/hide table

   Illustration 5	g00357387

6. Remove cap (9).
   Show/hide table

   Illustration 6	g00357388

7. Support the wiper motor assembly inside the cab. Remove bolt (10) and retaining nut (12).

8. Remove plate (11), the gasket and the wiper motor assembly.