Steering Cylinder (Right Side) - Install
Installation Procedure
- Use two people to install steering cylinder (2). The weight of the steering cylinder is 34 kg (75 lb).
Show/hide table
Illustration 1 | g00357422 |
- Install pin (11), the washer, and bolt (10) in the rod end of steering cylinder (2) .
- Install pin (9), the washer, and bolt (8) in the rod end of steering cylinder (2) .
Show/hide table
Illustration 2 | g00357421 |
- Connect grease line (7) .
- Connect hydraulic hose assembly (6) to the rod end of steering cylinder (2). Position manifold block (5). Install two bolts (4) .
Show/hide table
Illustration 3 | g00357419 |
- Install three hose brackets (3) on steering cylinder (2) .
Show/hide table
Illustration 4 | g00357418 |
- Connect hydraulic hose assembly (1) to the rod end of steering cylinder (2) .
Show/hide table
Illustration 5 | g00357417 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
3306C Engines for Caterpillar Built Machines Piston and Rings
517 Track-Type Skidder Fan Drive Bearing - Lubricate
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Cylinder (Right Side) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Cylinder (Left Side) - Install
784B Tractor and 785B Off-Highway Truck Power Train Transmission Hydraulic System
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove
784B Tractor and 785B Off-Highway Truck Power Train Pressure Switch (Service Brake and Retarder)
572R Pipelayer Power Train Hydraulic System
793B Off-Highway Truck Air System and Brakes Screen (Torque Converter and Front Brake Cooling)
789B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Cylinder (Left Side) - Remove
517 Track-Type Skidder Track Adjustment - Adjust
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Install
527 Track-Type Skidder Air Conditioner Belt - Inspect/Adjust/Replace - If Equipped
966G Wheel Loader and 972G Wheel Loader Power Train Troubleshooting Backup Alarm
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Disassemble
572R Pipelayer General Information
517 Track-Type Skidder Alternator and Fan Belts - Inspect/Adjust/Replace
572R Pipelayer Steering and Brake Control Valve
572R Pipelayer Priority Valve
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Neutralizer Valve - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Single-Pin Power Connection
966G Wheel Loader and 972G Wheel Loader Power Train Troubleshooting Starting System
572R Pipelayer Magnetic Screen