Swing Bearing - Lubricate
Show/hide table
Illustration 1 | g00347640 |
Bearing Lubrication Fittings |
The swing bearing is located between the upper frame and the lower frame.
The swing bearing is equipped with two grease fittings which allow lubrication of the internal bearing surfaces. Use a 2S-3230 Grease Cartridge in order to lubricate the swing bearing.
- Wipe both fittings before you apply lubricant.
- Apply the lubricant through the fittings that are shown in Illustration 1.
Use a hand grease gun to lubricate the swing bearing.
- Rotate the machine to the right for one-third of a turn.
- Stop the machine and apply lubricant through the fittings that are shown in Illustration 1.
- Rotate the machine to the right for one-third of a turn.
- Stop the machine and apply lubricant through the fittings that are shown in Illustration 1.
- Do not apply additional lubricant to the fittings.
- Rotate the machine for two complete revolutions in each direction. This will evenly distribute all of the newly applied grease.
Caterpillar Information System:
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Rear) - Adjust
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Troubleshooting - Transmission
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Troubleshooting - Three-Point Hitch
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Troubleshooting - Steering
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Troubleshooting - Implement Hydraulic System
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Drawbar Adjustment
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Drawbar Pin
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Ground Speed Signal Connector
539 Knuckleboom Loader Windows - Clean
539 Knuckleboom Loader Cooling System Coolant Extender (ELC) - Add
539 Knuckleboom Loader Cooling System Coolant (ELC) - Change
517 Track-Type Skidder Leaving the Machine
539 Knuckleboom Loader Engine Air Filter Primary Element - Clean/Replace
539 Knuckleboom Loader Engine Air Filter Secondary Element - Replace
539 Knuckleboom Loader Engine Air Precleaner - Clean
539 Knuckleboom Loader Engine Oil Level - Check
539 Knuckleboom Loader Engine Oil and Filter - Change
539 Knuckleboom Loader Fuses - Replace
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Warning Signs and Labels
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Expansion Valve System
527 Track-Type Skidder Shipping the Machine
784B Tractor and 785B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Check Valve
517 Track-Type Skidder Lifting and Tying Down the Machine