Tilt Cylinder Bearings and Bucket Linkage Bearings - Lubricate
Wipe off all fittings before any lubricant is applied.
Show/hide table
 | |
| Illustration 1 | g00291870 |
Apply lubricant through three fittings (2), (3) and (4).
Show/hide table
 | |
| Illustration 2 | g00765808 |
For pin joint (1), apply lubricant through a remote fitting on the right side of the machine. Use the fitting that is toward the front of the machine.
There is a total of four fittings.
Caterpillar Information System:
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Drive Shaft (Rear) - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System Brake Control Valve (Parking)
793B Off-Highway Truck Model View Illustrations
789C Off-Highway Truck Air System and Brakes Front Wheel
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Pinout Specifications for Electronic Control (Power Train)
3208 Marine Engine Cooling System Coolant (ELC) - Change
966G Wheel Loader and 972G Wheel Loader Hydraulic System Hood Tilt Actuator
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Drive Shaft (Center) - Remove and Install
561M Pipelayer Equalizer Bar
561M Pipelayer Pivot Shaft
3208 Marine Engine Cooling System Coolant (DEAC) - Change
IT14G Integrated Toolcarrier Fuel Injection Timing - Check
C15 and C18 Petroleum Generator Sets Fan Drive Bearing - Lubricate
966G Wheel Loader and 972G Wheel Loader Hydraulic System Oil Filter (Hydraulic)
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve
793C and 793C XQ Off-Highway Truck Air System and Brakes Air Control Valve (Window Wiper)
789B Off-Highway Truck Air System and Brakes Service and Parking Brake (Front)
3126B Engine for Caterpillar Built Machines Valve Rocker Arms, Lifters, and Bridges
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Slack Adjuster (Rear)
3126B Engine for Caterpillar Built Machines Cylinder Head Valves
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic Lock Control - If Equipped
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System Vane Pump (Implement, Pilot and Braking)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Brake Reservoir Oil Level - Check
3116 Truck Engines Engine Oil Cooler Bypass Valve