New B Series Telehandler PHS Sub-Module Flashing
Usage:
CONFIDENTIAL TIBU4666-00
Show/hide table
TECHNICAL INFORMATION BULLETIN |
October 27, 2005 |
TELEHANDLERS |
TH220 (SLA0880-UP) TH330 (SLB1500-UP) TH340 (SLC0850-UP) TH350 (SLD1400-UP) TH360 (SLE4500-UP) TH460 (SLF2100-UP) TH560 (SLG1300-UP) TH580 (SLH0900-UP) |
Component Code(s) 7620 |
SUBJECT: New B Series Telehandler PHS Sub-Module Flashing
PROBLEM:
Currently the 247-7829 PHS module cannot be sub module
flashed with the (253-1881) software by dealer technicians because of a machine control software problem with 280-2707 software.If a PHS module is flashed the following message will be observed:
And then:
SOLUTION:
An interim solution has been identified until new machine control software can be released.
If the machine ECM software part number is 280-2707 or a higher number, do not attempt to flash the machine ECM with a lower numbered software.
If one of the above machines needs to have the machine ECM software flashed or the 247-7829 PHS valve flashed with 253-1881 software, please contact one of the TH Service Engineers listed below for interim software and instructions.
Note: Do not attempt to flash any machine ECM listed within the serial number range above with 262-1938 software.
NACD: EAME:
Ken Klein: 919-465-2703 George Sadler: +44 1455 825391
Kleinke2@cat.com Sadler_George_W@cat.com
Colin Harrison: 919-465-2705 Russ Hickling: +44 1455 821561
Harrison_Colin@cat.com Hickling_Russ@cat.com
COPYRIGHT 2005 CATERPILLAR
ALL RIGHTS RESERVED