Usage:
CONFIDENTIAL TIBU4665-00
TECHNICAL INFORMATION BULLETIN |
October 27, 2005 |
BACKHOE LOADERS |
416 (SHA1-UP) 416 (CST1-UP) 420ST (HLS1-UP) 420PL (KMW1-UP) 420 (THP1-UP) 428 (SNL1-UP) 430ST (EAT1-UP) 430PL (DDT1-UP) 430 (BYC1-UP) 432 (BXE1-UP) 434 (FSH1-UP) 442 (GKZ1-UP) 444 (LBE1-UP) 450 (EBL1-UP) |
Component Code(s) 7610 7620 7490 |
SUBJECT: Unintended Fault Codes Logged Against the Flashing J1939 Control on Some Backhoe Loaders
PROBLEM:
When the machine ECM is flashed, it does not properly notify the Advisor that it will be off-line. As a result the Advisor will log a 1603-9 fault (Machine Control Module Abnormal Update) during flashing of the machine ECM.
SOLUTION:
After successfully flashing the machine ECM, clear all logged diagnostics from the Advisor. If the 1603-9 diagnostic doesn't return (should return in approximately 15 seconds) then there is not a problem.
COPYRIGHT 2005 CATERPILLAR
ALL RIGHTS RESERVED