Installation Of Electric Wiper Motors{7300, 7305}
Usage:
Machines equipped with electric wiper motors
Reference: Service Manual
Many wiper motors are the same, except for the position of the crank arm. If the part number that was ordered is different from the original part number, it may be necessary to change the position of the crank arm.
1 Remove the wiper group from the cab; see the Service Manual.
2 Measure angle (A) between bracket (1) and crank arm (2) on both the former and new wiper group. If the angles are not the same, remove crank arm (2) from the new wiper group and move it to the same angle (A) as on former group.
NOTE: This procedure is the same as rotating the crank arm 180°. Tighten nut (3) to a torque of 8 to 10 N·m (6 to 7 lb-ft).
Caterpillar Information System:
Using The 6V7899 Size Setting Fixture Group{651} Using The 6V7899 Size Setting Fixture Group{651}
Use Of 6V7898 Dial Bore Gauge Group{0761} Use Of 6V7898 Dial Bore Gauge Group{0761}
Installation Of 2W3815 Or 5N93 Inserts{1217} Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 9V5348 Hydraulic Control Arrangement (4-Valve; A.E.M. Ripper){5000} Installation Of 9V5348 Hydraulic Control Arrangement (4-Valve; A.E.M. Ripper){5000}
Installation Of Rear Frame Reinforcement Group{7051} Installation Of Rear Frame Reinforcement Group{7051}
Procedure For Conversion From Oil Lubrication To Grease Lubrication For Rear Power Takeoff Clutches{3055} Procedure For Conversion From Oil Lubrication To Grease Lubrication For Rear Power Takeoff Clutches{3055}
Installation Of Sliding Window Seals{7555} Installation Of Sliding Window Seals{7555}
Installation Of P.T.O. Driveshaft And Bearings{1165} Installation Of P.T.O. Driveshaft And Bearings{1165}
Installation Of 9V8854 Tree Collector Arrangement{6320} Installation Of 9V8854 Tree Collector Arrangement{6320}
Installation Of 1W4259 Valve Spring{1108} Installation Of 1W4259 Valve Spring{1108}
Operation, Maintenance, Troubleshooting And Repair Of 6V4135 Automatic Halogen Gas Leak Detector{0774} Operation, Maintenance, Troubleshooting And Repair Of 6V4135 Automatic Halogen Gas Leak Detector{0774}
Use Of 6V7028 Spring Seat Enlarger For 3200 Cylinder Heads{1101} Use Of 6V7028 Spring Seat Enlarger For 3200 Cylinder Heads{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101} Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V7050 Lifter Spring Compressor Group{0622} Use Of 6V7050 Lifter Spring Compressor Group{0622}
Use Of 6V7762 Dual Hook Hoist And Installation Of 6V7919 Conversion Group{641} Use Of 6V7762 Dual Hook Hoist And Installation Of 6V7919 Conversion Group{641}
Use Of 6V7061 Battery Cable Crimping Die{0709, 0710, 1400} Use Of 6V7061 Battery Cable Crimping Die{0709, 0710, 1400}
Installation Of 6T6051 Manifold Assembly{3150} Installation Of 6T6051 Manifold Assembly{3150}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101} Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Installation Of 9P8451 Carrier And 9P8452 Hub{3150} Installation Of 9P8451 Carrier And 9P8452 Hub{3150}
Installation Of 4T8587 Circle Drive Motor Group{5058, 5207} Installation Of 4T8587 Circle Drive Motor Group{5058, 5207}
Installation Of 3G3739 And 4T3259 Bearing Inserts{4351} Installation Of 3G3739 And 4T3259 Bearing Inserts{4351}
Use Of 6V9050 Exhaust Stud Removal Group{1100} Use Of 6V9050 Exhaust Stud Removal Group{1100}
Discharge Recommendations For Gas Operated Counterbalance Support Assemblies{7250, 7300} Discharge Recommendations For Gas Operated Counterbalance Support Assemblies{7250, 7300}
Installation Of 6V9068 Repair Kit{0708, 1315} Installation Of 6V9068 Repair Kit{0708, 1315}