Governor Control Motor {1265}
Usage:
RM-350 (5FK1-Up) Reclaimer Mixer, SM-350 (1RM1-Up) Stabilizer Mixer
- SUPPLEMENT: FEBRUARY 22, 1999
Service Magazine SEPD0453, Article 36, Page 25, January 25, 1999; "Governor Control Motor".
The line art for this service magazine article is incorrect. The rod end should be in the upper hole. The corrected line art is below.
--------------- END SUPPLEMENT ---------------
Description of Change: Purpose Of Article: To inform dealers and customers of the potential benefit from changing the location of the throttle linkage on the 4W-7773 Governor Control Motor.
Adaptable To: RM-350 (5FK1 & Up) and SM-350 1RM1 & Up).
At the throttle (1) move the rod end to the upper hole. At the motor (2) move the rod end to the lower hole.
Caterpillar Information System:
1999/01/25 Revised Torque Settings For Boom Chain Adjusters {6460}
1999/01/25 Service Manual SENR1374 Now Covers IT62G Integrated Toolcarrier {0374,0375,7568}
1999/01/25 Correction To Power Train Disassembly And Assembly Manual SENR1381-01 {0600,0722,3254,3258,3260}
1999/01/25 Hard Steering {4307,4312}
1999/01/25 Fuel Level Senders Improved To Prevent Open Circuit Conditions {1273,1408,7481}
1999/01/25 Wheel Station Modifications May Decrease Oil Temperatures On Certain Off-Highway Trucks {4208,4051,4070}
1999/01/25 Prevention Of Cracking Of 125-6961 A-Frame Support Assembly {7050}
1999/01/25 Truck Body Guides No Longer Installed On Large Off-Highway Trucks {7258}
1999/01/25 Improved Final Drive Wheel Bearing Retainer Plate Available For Certain Off-Highway Trucks {4051,4208}
1999/01/25 Magnetic Tube No Longer Included In Rear Axle Housing {3260,4070,3016}
1999/01/25 New Second Reduction Final Drive Planetary Bearing Available For Certain Off-Highway Trucks {4050,7551}
1999/01/25 Improved Exhaust Tubes Now Used On Off-Highway Trucks {1061}
1999/01/25 Installation Replacement For Screed Extender Support Bushings {6641}
1999/01/25 Summary Of Improvements To Versatile Flotation Systems {6331}
1999/02/01 Correction To Disassembly And Assembly Manual, SENR8308-01{4150}
1999/02/01 Low Pressure Return/Case Drain Couplers Available{5050}
1999/02/01 Finding Top Center Position For Number 1 Piston{1156}
1999/02/01 New Flash Files Require Pressure Sensor Relocation{7414,1902}
1999/02/01 Off-Highway Truck Duo-Cone Seal Service Tools And Installation Video Now Available{7561}
1999/02/01 New Welding Procedure For Fuel And Hydraulic Tank Mounts For Certain Off-Highway Trucks{7050}
1999/02/01 Bearing Specifications For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Drive Group{1714}
1999/02/01 New Service Information Available For Forest Products{0374,0375}
1999/02/01 Procedure For Propel Pump Neutral Adjustment For Rubber Tire And Steel Track Asphalt Pavers{3108}
1999/02/01 Procedure For Propel Pump Neutral Adjustment For AP-1055B/BG-2455C{3108}