Usage:
IT62G (6PS) Integrated Toolcarriers, 950G (2JS, 4BS, 3JW, 5FW, 5MW, 6NS, 8DS, 8JW),
962G (3BS, 5AS, 5RS, 9BS, 4PW, 6EW, 6HW, 7BW) Wheel Loaders
Reference: Service Manual Module, SENR1381-01, Disassembly and Assembly, 950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier, Power Train; Page 88, "Axle Housing - Disassemble"; Page 114, "Differential and Bevel Gear - Install". This module is found in Service Manual, SENR1374, 950G & 962G Wheel Loader and IT62G Integrated Toolcarrier.
On Page 88 in Table 14, Tools C, D and E are incorrect. Replace Table 14 with the following corrected Table.
Step 6 on Page 114 is incorrect. Replace Step 6 with the following corrected Step.
6. Lower the temperature of bearing cup (19). Use insulated gloves to install bearing cup (19) in sleeve assembly (18). Install sleeve assembly (18) and locating pin (17) in differential housing (20).