1998/08/10 Caterpillar

Use Hydraulic Torque Wrenches and Accessories for High Torque and/or Low Clearance Applications 132-8112 HY-1XLT 132-8119 HY-3XLT 132-8126 HY-5XLT 132-8133 HY-10XLT 1U-6221 HY-2XLCT 132-8159 HY-4XLCT 132-8183 HY-8XLCT 132-8206 HY-4ULC 132-8223 Power

Usage:

All Models

Warranty: M

Features/Benefits

* Can decrease bolting time by up to 75%

* Easy and safe to use

* Accurate torque to ± 3%

* The best torque-to-weight ratio available

Specifications/Technical Information

132-8112 HY-1XLT - 3/4 in Square Drive -(max. ft. lbs. 1,400)

132-8119 HY-2XLT - 1 in Square Drive -(max. ft. lbs. 3,100)

132-8126 HY-5XLT - 1 1/2 in Square Drive -(max. ft. lbs. 5,600)

132-8133 HY-10XLT - 1 1/2 in Square Drive -(max. ft. lbs. 11,200)

1U-6221 HY-2XLCT (Accessories below)

132-8143 - 36 mm Low Clearance Hex Link -(max. ft. lbs. 1,670)

1U6222 - 46 mm Low Clearance Hex Link -(max. ft. lbs. 1,670)

132-8144 - 55 mm Low Clearance Hex Link -(max. ft. lbs. 1,670)

132-8154 - 3/4 in Square Drive Link -(max ft. lbs. 1,360)

132-8159 HY-4XLCT (Accessories below)

132-8176 - 36 mm Low Clearance Hex Link -(max. ft. lbs. 3,750)

132-8177 - 46 mm Low Clearance Hex Link -(max. ft. lbs. 3,750)

132-8178 - 55 mm Low Clearance Hex Link -(max. ft. lbs. 3,750)

132-8167 - 1 in Square Drive Link -With Reaction Arm (max. ft. lbs. 3,050)

132-8183 HY-8XLCT (Accessories below)

132-8190 - 55 mm Low Clearance Hex Link -(max. ft. lbs. 7,500)

132-8191 - 65 mm Low Clearance Hex Link -(max. ft. lbs. 7,500)

132-8192 - 70 mm Low Clearance Hex Link -(max. ft. lbs. 7,500)

132-8201 - 1 1/2 in Square Drive Link -(max. ft. lbs. 6,250)

132-8206 HY-4ULC - max. ft. lbs 3,050 (Accessories below)

132-8212 - 36 mm Low Clearance Hex Link

132-8213 - 46 mm Low Clearance Hex Link

132-8214 - 55 mm Low Clearance Hex Link

132-8220 - 1 in Square Drive Link

132-8223 - 115V, 50/60 Hz, Single Phase, -Hose & Gauge Included

132-8231 - 220V, 50/60 Hz, Single Phase, -Hose & Gauge Included

132-8232 - 60-120 Psi, Hose & Gauge Included

Hydraulic Torque Wrenches and Accessories

Caterpillar Information System:

1998/08/10 Heavy-Duty 151-0968 Variable Speed, Inch, Reversing Drill now available {0600}

1998/08/10 Foot Rests Can Be Added To Certain Asphalt Compactors {7253,7312}

1998/08/10 Adding Plug And Breather Extends Service Life Of Drum Eccentric Bearings By Reducing Contamination {6605}

1998/08/10 Service Information For Off-Highway Truck Transmissions {3080,3030,3050}

1998/08/10 Disassembly and Assembly Module, SENR1461, "3516B Engine"; Disassembly and Assembly Module, SENR1462, "Power Train"; Disassembly and Assembly Module, SENR1463, "Machine Systems"; Now Available for 793C Off-Highway Trucks

1998/08/10 Hydraulic Line Routing Change Will Decrease Possible Contamination On Certain Off-Highway Trucks {5057}

1998/08/10 Improved Rear Brake Groups Available for 789 and 789B Off-Highway Trucks {4006,4008}

1998/08/10 Use 143-5455 Lifting Bracket for Torque Converter Removal and Installation {1003,3101,4092}

1998/08/10 Use 143-4987 Lifting Bracket Adapter to Remove and Install Planet Carrier Assembly {3816}

1998/08/10 New Window Kit Available {7310}

1998/08/10 The Causes Of Worn And Broken Piston Rings {1215}

1998/08/10 New Piston Rings Provide Increased Service Life {1215}

1998/08/10 Use 146-1738 Borescope for Internal Inspection of Caterpillar Products {0777}

1998/08/10 Use Recommended Repair Parts for Torque-Turn Track Wrench 5000 {4172,0602}

1998/08/10 Use 147-1758 Filter Element, 134-5901 Spares Kit, 135-6547 Auxiliary Filter, and 1R-0712 Fuel Filter to Perform Maintenance for Hartridge AVM Test Bench {1250,0782}

1998/08/17 Belt Selection, Bolt Torque, And Special Application Drive Wheel Scraper Maintenance Recommendations {4199}

1998/08/17 New Service Meter Increases Reliability {7480}

1998/08/17 New Integral Seal Replaces Gasket In Engine Water Lines Groups {1380}

1998/08/17 Use 150-2505 Maintenance Tool Group For Pipelayer Maintenance {0600}

1998/08/17 Remanufactured Wheel Stations And Wheel Station Components For Off-Highway Trucks {3001,4051}

1998/08/17 Use 123-4588 Plate Gauge To Measure Shim Pack Thickness {4314}

1998/08/17 Improved Pilot Valve Group Now Available {4805}

1998/08/17 Service Code May Be Logged If Implement Levers Are Moved Prior To Start Up {5737,6116,7490}

1998/08/17 Correction To Operational Check And Zero Check For LSI (Type 2 System) {7455,7400,1706,1408}