1998/08/10 Caterpillar

Heavy-Duty 151-0968 Variable Speed, Inch, Reversing Drill now available {0600}

Usage:

All Models

Warranty: M

Features/Benefits

* Replaces canceled 4C-9928 Drill

Drill

* Advanced Magnaquench® Rare-Earth motor combines neodymium iron-boron high density magnets for high torque, high efficiency, and long run times

* Motor is fan cooled to withstand heavy use

* Uses long life brushes that never need replacing, for tough professional applications

* Two speed ranges of 0 to 350 rpm for high torque and 0 to 1250 rpm for high speed

* Twenty-position adjustable clutch offers complete control of torque from 15 to 288 in-lbs

* Electric brake stops tool instantly when variable speed trigger is released

* Keyless Jacobs® chuck provides maximum gripping power

* Variable speed trigger and reversing button positioned for one-handed operation

* Warranted by manufacturer for 1 year from date of purchase

Batteries

* Group comes with two 12 Volt removable battery packs

* High amp/hour batteries run 30% longer between recharge cycles than standard batteries

* Batteries will not develop memory (it is not necessary to totally discharge battery prior to recharging)

Battery Charger

* Charges battery using a soft-pulse method for long battery cycle life

* Maintains charge by trickle charging

* Will detect a weak or defective pack that needs to be replaced

* Built-in sensor waits for battery to cool or warm, before it begins to charge

Specifications/Technical Information

Battery voltage - 12 VDC

Clutch - 20 positions

Speed ranges - 0 to 350 rpm and 0 to 1250 rpm

Weight with battery pack - 1.9 kg (4.2 lbs)

Shipping weight - 6.6 kg (14.5 lbs)

(1) 151-0968 Variable Speed Drill, Heavy-Duty, Cordless, 3/8 inch, 12 Volt (2) Extra battery (3) Battery charger (4) Case

Caterpillar Information System:

1998/08/10 Foot Rests Can Be Added To Certain Asphalt Compactors {7253,7312}

1998/08/10 Adding Plug And Breather Extends Service Life Of Drum Eccentric Bearings By Reducing Contamination {6605}

1998/08/10 Service Information For Off-Highway Truck Transmissions {3080,3030,3050}

1998/08/10 Disassembly and Assembly Module, SENR1461, "3516B Engine"; Disassembly and Assembly Module, SENR1462, "Power Train"; Disassembly and Assembly Module, SENR1463, "Machine Systems"; Now Available for 793C Off-Highway Trucks

1998/08/10 Hydraulic Line Routing Change Will Decrease Possible Contamination On Certain Off-Highway Trucks {5057}

1998/08/10 Improved Rear Brake Groups Available for 789 and 789B Off-Highway Trucks {4006,4008}

1998/08/10 Use 143-5455 Lifting Bracket for Torque Converter Removal and Installation {1003,3101,4092}

1998/08/10 Use 143-4987 Lifting Bracket Adapter to Remove and Install Planet Carrier Assembly {3816}

1998/08/10 New Window Kit Available {7310}

1998/08/10 The Causes Of Worn And Broken Piston Rings {1215}

1998/08/10 New Piston Rings Provide Increased Service Life {1215}

1998/08/10 Piston And Piston Ring Reference Chart For 3500 And 3500B Engines {1214,1215}

1998/08/10 Use Hydraulic Torque Wrenches and Accessories for High Torque and/or Low Clearance Applications 132-8112 HY-1XLT 132-8119 HY-3XLT 132-8126 HY-5XLT 132-8133 HY-10XLT 1U-6221 HY-2XLCT 132-8159 HY-4XLCT 132-8183 HY-8XLCT 132-8206 HY-4ULC 132-8223 Power

1998/08/10 Use 146-1738 Borescope for Internal Inspection of Caterpillar Products {0777}

1998/08/10 Use Recommended Repair Parts for Torque-Turn Track Wrench 5000 {4172,0602}

1998/08/10 Use 147-1758 Filter Element, 134-5901 Spares Kit, 135-6547 Auxiliary Filter, and 1R-0712 Fuel Filter to Perform Maintenance for Hartridge AVM Test Bench {1250,0782}

1998/08/17 Belt Selection, Bolt Torque, And Special Application Drive Wheel Scraper Maintenance Recommendations {4199}

1998/08/17 New Service Meter Increases Reliability {7480}

1998/08/17 New Integral Seal Replaces Gasket In Engine Water Lines Groups {1380}

1998/08/17 Use 150-2505 Maintenance Tool Group For Pipelayer Maintenance {0600}

1998/08/17 Remanufactured Wheel Stations And Wheel Station Components For Off-Highway Trucks {3001,4051}

1998/08/17 Use 123-4588 Plate Gauge To Measure Shim Pack Thickness {4314}

1998/08/17 Improved Pilot Valve Group Now Available {4805}

1998/08/17 Service Code May Be Logged If Implement Levers Are Moved Prior To Start Up {5737,6116,7490}