Special Instruction SEHS9429-01 Available for Spherical Bearings for Bulldozers and Rippers{7551,6050,6313}
Usage:
All Machines equipped with Bulldozers or Rippers Using Spherical Bearings
Special Instruction SEHS9229-01, "Spherical Bearings for Bulldozers and Rippers" is available through normal literature channels.
This Special Instruction provides the necessary information for the identification, location, and parts availability for service of spherical bearings for bulldozers and rippers. The information applies to all machines with bulldozers and rippers that use spherical bearings.
Caterpillar Information System:
1994/12/26 New Oil Tube Clamp Assembly Is More Durable and More Resistant to Leakage {1307}
1994/12/26 Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26 New Bearing Housing Used In Turbocharger Group {1056,1052}
1994/12/26 New Engine Oil Pressure Gauge And Sender {7455}
1994/12/19 New Electronic Control Group (Throttle Position Sensor) Has Improved Contact Design {1913}
1994/12/19 New Water And Oil Temperature Regulators Available {1330,1355}
1994/12/19 New Connecting Rod Assembly Has Increased Fatigue Strength {1218}
1994/12/19 Special Instruction SEHS9734-01 Is Available For Retrofitting R-12 Air Conditioning Systems To R-134a Refrigerant {7320,1809}
1994/12/19 Spacer Plate Is Available To Make Installation Of Permanent Hose Couplings Easier {0684,5057}
1994/12/19 New Filter Used For Screed Burner And Washdown Systems {1274,5642}
1994/12/19 Primary Pressure For The Transmission Pressure Control Group Has Been Increased {0374,3150}
1994/12/19 New Screen Assembly Prevents Large Debris From Transferring Into Differential Compartment {4051,3258}
1995/01/16 Fuel Injection Pump Change{1251}
1995/01/16 R-134a Refrigerant Used For Air Conditioner Charge{1802,1805}
1995/01/16 Boom Lock Cable Tube Is Now Serviceable{5477,5063}
1995/01/16 Wheel Bearing Check And Adjustment Maintenance Interval{4208}
1995/01/16 Maintenance Intervals Are More Uniform{0375,1300,1350,3250,5600,6600}
1995/01/16 New Exhaust Manifold Gasket Available{1059}
1995/01/16 Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16 New Tube Assemblies Used In Fuel Lines Groups{1274}
1995/01/16 New Oil Pans Have Oil Level Sensor Mounting Hole{1302}
1995/01/16 Fabricated Spacer Will Help Prevent Fan Belt Loss{1357,1359,1405}
1995/01/23 Parts Are Now Serviceable For Roading Lights {1429}
1995/01/23 New Final Drive Bearings Give Longer Service Life And Are Easier To Install {4055,4092}