Usage:
D22 (22DB),
D25 (25DB),
D25B (25DB, 25LC, 25LP),
D250 (25NA),
D250B (5WD1-349),
D275 (27DB, 27LM),
D275B (27LP),
D30C (7ZC),
D35 (35DT),
D35C (2GD),
D35 HP (3FD),
D300B (4SD1-352, 4SD357-365),
D330 (33CT, 33DP, 33DB),
D330C (33DB),
D350 (35DB, 35LC, 35LM, 35PC, 35QT, 35UF),
D350B (35DB, 35LM, 35QT, 35RT),
D350C (8XC),
D400 (1MD),
D25D (1HK),
D30D (3AJ, 1PK),
D350D (9RF),
D400D (8TF, 4EJ) Articulated Trucks
Sleeves are available for repairing the tractor oscillating hitch pin bores.
To install the sleeves, the size of the hitch pin bore must be increased before the sleeves are installed. Use the chart and the method that follows to select and to install the sleeves.
Location of diameter (A).
1. Increase the size of the top and bottom hitch pin bores as shown. Diameter A for the D250B and D300B Articulated Trucks is 73.55 + 0.00, -0.03 mm (2.896 + .000, -.001 in). For all other articulated trucks, diameter A is 79.90 + 0.00, -0.03 mm (3.146 + .000, -.001 in).
2. Install the sleeves in the bores.