1993/05/10 Caterpillar


Longer Engine Mounting Bolt Resists Loosening{1152}

Usage:


D20D (9MG),
D250D (6NG) Articulated Trucks

Description of Change: A new bolt is used in the front engine mount. The new bolt provides longer thread engagement and is more resistant to loosening.

Adaptable To: The new 8T0070 Bolt is a direct replacement for the former 8T0362 Bolt. The new bolt is effective with D20D (9MG102) and D250D (6NG192) Articulated Trucks.

Caterpillar Information System:

1993/05/10 Orifice Plate Used In Muffler Outlet{1061,1050}
1993/05/10 New Control Valve Group Eliminates Hoist Valve Instability{5136,5100}
1993/05/03 Yellow And Black Polyurethane Touch-Up Paint Available {7559,7581}
1993/05/03 Magnetic Relays Relocated To Eliminate Excessive Vibration {1400,1426}
1993/05/03 Loader Bucket Auxiliary Lines {5050}
1993/05/03 Notice Film For Brake Reservoir Cap Now Used {4291}
1993/04/19 Brake Actuator Lever Cover Plate May Be Modified For Easy Access To Brake Bellcrank Lube Joint{4269}
1993/04/19 New Duo-Cone Seal Installer Available{7561}
1993/04/12 New Seal Group Used In Water Pump Groups{1361}
1993/04/12 Fan Drive Pulley Group Components{1359}
1993/04/12 Addition Of Fiberglide Bearings In Front Axle Bearings Bolsters And Kingpins Help Reduce Noise And Premature Wear Of Non-lubricated Pins, Bolsters And Kingpins{4313}
1993/04/05 Ring Added To Elbow To Help Retain Adapter In Aftercooler Group{1063}
1993/05/10 New Washers Used In Differential Group{3250}
1993/05/10 Sleeves Available For Rebuilding Tractor Oscillating Hitch Pin Bores{7057,7066}
1993/05/10 Shims Used To Provide Clearance Between Pin Retainers And Truck Body{7258,7250}
1993/05/10 Decal Location{7581}
1993/05/10 New Mount Bracket Minimizes Contaminants Into Key Start Switch{1553}
1993/05/10 New Gas Springs For Engine Enclosure Doors{5486,7263}
1993/05/10 New Oil Filter Base Supports Help Prevent Incorrect Oil Filter Base Installation{1306}
1993/05/17 Air Horn Group Now Standard To Meet Overseas Specifications {7402}
1993/05/17 Optional Bronze Thrust Disc Available {3160}
1993/05/17 New Seals Assist In Preventing Cooling Oil Transfer From Brake To Wheel Oil {4251}
1993/05/17 Holes Drilled Inside The Transfer Gearbox Case Can Improve Oil Flow {3106,3100}
1993/05/17 Deflector Plates Prevent Mudflaps From Coming In Contact With The Tires {4220,7252,4200}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.