Personality Ratings Module
Usage:
Remove & Install Personality Ratings Module
NOTE: Before removing and installing the personality ratings module from the electronic control module, refer to the topic "Programming New Electronic Control Modules" in the Electronic Trouble Shooting module, form SENR5191, for further information.
1. Remove the four bolts, cover (2) and the O-ring seal from electronic control module (1). Check the condition of the O-ring seal beneath cover (2) and replace with a new one if needed. For purposes of reassembly, the torque for the bolts holding cover (2) is 1.36 N·m (12 lb in).
2. Remove personality ratings module (3).
3. Install personality ratings module (3) in the reverse order of removal.
Caterpillar Information System:
3512 AND 3516 EUI ENGINES Electronic Control Module (ECM)
3512 AND 3516 EUI ENGINES Aftercooler
3512 AND 3516 EUI ENGINES Exhaust Manifolds
3512 AND 3516 EUI ENGINES Oil Cooler
3512 AND 3516 EUI ENGINES Oil Sequence Valves
3512 AND 3516 EUI ENGINES Flywheel
3512 AND 3516 EUI ENGINES Accessory Drive (Front)
3512 AND 3516 EUI ENGINES Oil Scavenge Pump
3512 AND 3516 EUI ENGINES Oil Pan
3512 AND 3516 EUI ENGINES Oil Filter Base
3512 AND 3516 EUI ENGINES Oil Pump
3512 AND 3516 EUI ENGINES Fuel Transfer Pump
3512 AND 3516 EUI ENGINES Oil & Water Pump Drive
3512 AND 3516 EUI ENGINES Crankshaft Pulley & Vibration Damper
3512 AND 3516 EUI ENGINES Crankshaft Front Seal And Wear Sleeve
3512 AND 3516 EUI ENGINES Crankshaft Rear Seal And Wear Sleeve
3512 AND 3516 EUI ENGINES Front Drive Housing
3512 AND 3516 EUI ENGINES Flywheel Housing
3512 AND 3516 EUI ENGINES Accessory Drive (Rear)
3512 AND 3516 EUI ENGINES Rear Gear Group
3512 AND 3516 EUI ENGINES Valve Covers
3512 AND 3516 EUI ENGINES Unit Injectors
3512 AND 3516 EUI ENGINES Rocker Shaft Assemblies And Push Rods
3512 AND 3516 EUI ENGINES Rocker Shaft Assemblies