416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN Caterpillar

Start By:

a. remove transmission control valve

1. Disconnect wires (2) from the neutral start switch.

2. Remove bolts (1) to remove transmission control valve adapter (3). Inspect the gasket beneath the adapter.

3. Remove guide (7), spring (6) and ball (5) from the adapter.

4. Remove pin (4) and neutral start switch (8) from the adapter.

NOTE: Use the reverse order of Steps 1 through 4 for the installation of the transmission control valve adapter.

End By:

a. install transmission control valve