Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines Caterpillar


Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

Termination Date

July 31, 1995

Problem

Certain 1R0751 Fuel Filters need to removed from Parts Stock and from machines in dealer inventory equipped with 3114 and 3116 Engines with 1R0751 Fuel Filters.

Action Required

Remove all 1R0751 Fuel Filters with a date code of 1994 from Parts Stock and from machines equipped with 3114 and 3116 Engines with 1R0751 Fuel Filters in dealer inventory that were shipped from the factory prior to April 15, 1995. The date code information is found in the following locations:

1. On the master box, the date code is printed as MMDDYY. Remove all 1R0751 Fuel Filters in master boxes with a date code ending in "94".

2. On the individual yellow parts box, the date code is embossed as MMDDYY.Remove all 1R0751 Fuel Filters in yellow boxes with a date code ending in "94".

3. On the filter itself, the date code follows the NUMERALKOD date code configuration. Remove all 1R0751 Fuel Filters with a six-digit code date code ending in "DR".

NOTE: TEPS/MEPS dealers are reimbursed for defective Parts Stock by returning the defective Parts Stock to their administering Caterpillar dealer for replacement.

Service Claim Allowances

Submit one claim for all 1R0751 Fuel Filters removed from Parts Stock and machines in dealer inventory.

NOTE: US and Canadian Dealers Only - When submitting a Parts Stock claim use 99Z00007 in the Product Identification Number Field.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

Remove All 1105146 Damper Assemblies From Parts Stock Remove All 1105146 Damper Assemblies From Parts Stock
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Product Support Program For Reworking Certain 3406C Truck Engines With Low Power Complaints Product Support Program For Reworking Certain 3406C Truck Engines With Low Power Complaints
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Product Support Program For Installing Flexible Conduit On The Wiring Harness On Certain 3408 And 3412 Marine Engines Product Support Program For Installing Flexible Conduit On The Wiring Harness On Certain 3408 And 3412 Marine Engines
Replace The Piston Oil Cooling Tubes On Certain 3408B And 3408C Marine Engines Replace The Piston Oil Cooling Tubes On Certain 3408B And 3408C Marine Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Product Support Program For Replacing The Personality Module Installed On Certain 3408 Marine High Performance Engines Product Support Program For Replacing The Personality Module Installed On Certain 3408 Marine High Performance Engines
Product Support Program For Replacing The Front Gear Train On Certain 3208 Industrial Engines Used Primarily In Fertilizer Spreader Applications Product Support Program For Replacing The Front Gear Train On Certain 3208 Industrial Engines Used Primarily In Fertilizer Spreader Applications
A New Damper Assembly, Adaptor Ring And Front Idler Gear Bearing Need To Be Installed On Certain G3516 Engines A New Damper Assembly, Adaptor Ring And Front Idler Gear Bearing Need To Be Installed On Certain G3516 Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Oil Pressure Relief Valve Needs To Be Inspected On Certain 416B, 426B, 428B And 438B Backhoe Loaders, 307 And 312 Excavators, And 3054 Industrial And Generator Set Engines The Oil Pressure Relief Valve Needs To Be Inspected On Certain 416B, 426B, 428B And 438B Backhoe Loaders, 307 And 312 Excavators, And 3054 Industrial And Generator Set Engines
The Exhaust Valve Springs Need To Be Replaced On Certain 3116 Truck Engines The Exhaust Valve Springs Need To Be Replaced On Certain 3116 Truck Engines
Product Support Program For Improving Acceleration On Some 3116 Truck Engines Product Support Program For Improving Acceleration On Some 3116 Truck Engines
Service Letter Cancellation Service Letter Cancellation
Product Support Program For Replacing The Fuel Injector Assemblies On Certain 3176B Truck Engines Product Support Program For Replacing The Fuel Injector Assemblies On Certain 3176B Truck Engines
The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines The Fuel Injectors Need To Be Replaced In Certain 3406E Truck Engines
Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines Product Support Program For Replacing The Fuel Injectors In Certain 3406e Truck Engines
Product Support Program For Flashing 435 Hp (1650 Lb Ft Torque) Rated 3406E Truck Engines In Response To Low Power Complaints Product Support Program For Flashing 435 Hp (1650 Lb Ft Torque) Rated 3406E Truck Engines In Response To Low Power Complaints
Product Support Program For Improving The Starting Capabilities Of Certain 3412 Electronically Controlled (PEEC) Generator Set Engines Product Support Program For Improving The Starting Capabilities Of Certain 3412 Electronically Controlled (PEEC) Generator Set Engines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.