The Bolts That Fasten The Final Drive To The Axle On Certain 926E Loaders And IT28 Toolcarriers Need To Be Tightened Caterpillar

NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI1206" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and " T " as the SIMS Description Code. Exception: If the repair is done after failure, use "PI1206" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and " Z" as the SIMS Description Code.

Problem

The bolts that fasten the final drive to the axle on certain 926E Loaders and IT28B Toolcarriers need to be tightened.

Affected Product
Model & Identification Number

926E (94Z3782-3786, 94Z3790, 94Z3795, 94Z3800-3805, 94Z3807-3810, 94Z3812-3815, 94Z3818, 94Z3819, 94Z3823-3828, 94Z3830, 94Z3832-3833, 94Z3835, 94Z3836, 94Z3838, 94Z3840-3844, 94Z3846-3859)

IT28B (1HF2335-2475, 1HF2477-2480, 1HF2482-2483, 1HF2487)

Parts Needed

Not applicable

Action Required

Tighten the bolts that fasten the final drive to the axle to a torque of 270 ± 27 N·m (200 ± 20 lb.ft.). Tighten the bolts that mount the brake caliper to 130 ± 13 N·m (100 ± 10 lb.ft.) plus of a turn.

Owner Notification

U.S. and Canadian owners will receive the attached Owner Notification.

Service Claim Allowances

NOTE: This is a 1-hour job.

NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

NOTE: MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.

Attach. (1-Owner Notification)

Copy Of Owner Notification For U.S. And Canadian Owners