Usage:
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Termination Date
January 31, 1993Problem
Certain 0R1074 Remanufactured Rod Assemblies need to be removed from parts stock.
Action Required
Inspect 0R1074 Remanufactured Rod Assemblies. If the date code (stamped on the side of the rod eye) is 10/92 or later, or if a letter "R" is stamped after the part number, return the rod to parts stock. If neither of these conditions exist, inspect the piston end of the rod (opposite the eye end). If the chamfer on the end of the rod is less than 15.5 mm (.632"), or the two holes on the perimeter of the rod end do not have a slight chamfer, remove the rod from parts stock.
Service Claim Allowances
Submit one claim for all 0R1074 Rod Assemblies removed from parts stock.
Parts Disposition
U.S. Dealers
Return all 0R1074 Rod Assemblies that are removed from parts stock and a copy of the claim to:
Attn: Supplier Recovery Supervisor/PI7297
Warehouse #4 Docks 7 thru 10
8201 N. University
Peoria, IL 61615
All Other Dealers
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.