Certain Batches Of Cat Engine Oil Need To Be Removed From Stock
Usage:
@media screen {
div.divFooter {
display: none;
}
}
@media print {
div.divFooter {
position: fixed;
bottom: 0;
right: 0;
}
}
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
NOTE: This Service Letter does not apply to Canadian dealers. These batches of oil were not distributed in Canada.
Termination Date
November 30, 1992Problem
Some CAT Engine Oil may have been produced with viscosities higher than the label on its container indicates. The viscosities of the oil labeled 10W30 may actually be 12W30, and 15W40 may actually be closer to 18W40.
Action Required
Inspect your stock of CAT Engine Oil and remove containers with the following batch numbers and marking numbers:
Service Claim Allowances
Not Applicable
Mobil Oil will arrange to pick up the oil removed from stock and replace it with new CAT Diesel Engine Oil (-CF-4) in the corresponding container and quantities at no charge.
Parts Disposition
Call Debbie Widmeier at 1-800-662-4574 to file a report with Mobil Oil. Be prepared to provide your dealer code, name, address, viscosity, container sizes, quantity and location of oil removed from stock.
Caterpillar Information System:
Product Support Program For Replacing The Auto-Vibe Switch 5E9512 Handle Assembly) And The Vibratory Lockout Switch On Certain CB434 And CB534 Vibratory Compactors Product Support Program For Replacing The Auto-Vibe Switch 5E9512 Handle Assembly) And The Vibratory Lockout Switch On Certain CB434 And CB534 Vibratory Compactors
SAFETY - THE WHEEL RIM NUTS NEED TO BE TIGHTENED ON CERTAIN IT18 AND IT28 TOOLCARRIERS; AND ON CERTAIN 926 AND 916 LOADERS - P I1202 - MAILED US AND CANADA, CACO SAFETY - THE WHEEL RIM NUTS NEED TO BE TIGHTENED ON CERTAIN IT18 AND IT28 TOOLCARRIERS; AND ON CERTAIN 926 AND 916 LOADERS - P I1202 - MAILED US AND CANADA, CACO
Product Support Program For Installing A New Truck Payload Measurement System (TPMS) Control Group On Certain 785 Trucks Product Support Program For Installing A New Truck Payload Measurement System (TPMS) Control Group On Certain 785 Trucks
Product Support Program For Replacing The Inter-axle Differential Thrust Washers And Inter-axle Differential Output Shaft On Certain D40D And D400D Articulated Trucks Product Support Program For Replacing The Inter-axle Differential Thrust Washers And Inter-axle Differential Output Shaft On Certain D40D And D400D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
3S2708 Spring Pins Need To Be Removed From Parts Stock 3S2708 Spring Pins Need To Be Removed From Parts Stock
Product Support Program For Replacing Rusted Chrome Exhaust Stacks On Certain 416 Backhoe Loaders Product Support Program For Replacing Rusted Chrome Exhaust Stacks On Certain 416 Backhoe Loaders
The Rops Mounting Pad Welds Need To Be Inspected For Cracks On Certain CS431B, CP433B, And CS433B Compactors The Rops Mounting Pad Welds Need To Be Inspected For Cracks On Certain CS431B, CP433B, And CS433B Compactors
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework
8D3899 Washers Need To Be Removed From Parts Stock 8D3899 Washers Need To Be Removed From Parts Stock
Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders
Product Support Program For Replacing The Water Spray Group Water Pump On Certain CB434 Compactors Product Support Program For Replacing The Water Spray Group Water Pump On Certain CB434 Compactors
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Product Support Program For Installing New Transmission Bearings In Certain 789 And 793 Trucks Product Support Program For Installing New Transmission Bearings In Certain 789 And 793 Trucks
Existing Bolts In The Final Drive Group Of Certain 120G Motor Graders Need To Be Replaced Existing Bolts In The Final Drive Group Of Certain 120G Motor Graders Need To Be Replaced
Product Support Program For Installing New Final Drive Planet Shafts And Bearings In Certain 776 And 776B Tractors; And 777 And 777B Trucks Product Support Program For Installing New Final Drive Planet Shafts And Bearings In Certain 776 And 776B Tractors; And 777 And 777B Trucks
New Wheels (Housings) Need To Be Installed In The Rear Final Drive And Brake Groups Of Certain D40D Articulated Dump Trucks New Wheels (Housings) Need To Be Installed In The Rear Final Drive And Brake Groups Of Certain D40D Articulated Dump Trucks
Product Support Program For Replacing The Midshaft Bearing On Cerrtain D350D And D400D Articulated Trucks Product Support Program For Replacing The Midshaft Bearing On Cerrtain D350D And D400D Articulated Trucks
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E
Product Support Program For Replacing The Fuel Injection Nozzles In Certain D3C, D4C, D4H, D5C, And D5C LGP Tractors; D4H Track Skidders; 931C, 935C, 943, And 953 Loaders; 916 And 926E Loaders; And IT18B And IT28B Tool Carriers Product Support Program For Replacing The Fuel Injection Nozzles In Certain D3C, D4C, D4H, D5C, And D5C LGP Tractors; D4H Track Skidders; 931C, 935C, 943, And 953 Loaders; 916 And 926E Loaders; And IT18B And IT28B Tool Carriers
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactor Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactor
The Radiator Side Channels And Oil Cooler Mounts On Certain CS431B, CS433B, And CP433B Vibratory Compactors Need To Be Reinforced The Radiator Side Channels And Oil Cooler Mounts On Certain CS431B, CS433B, And CP433B Vibratory Compactors Need To Be Reinforced
New Planetary Gear Bearings Need To Be Installed In The Final Drives Of Certain 769C Trucks New Planetary Gear Bearings Need To Be Installed In The Final Drives Of Certain 769C Trucks