Product Support Program For Installing A New Truck Payload Measurement System (TPMS) Control Group On Certain 785 Trucks Caterpillar


Product Support Program For Installing A New Truck Payload Measurement System (TPMS) Control Group On Certain 785 Trucks

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

NOTE: This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS4792" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use "T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.

Termination Date

July 31, 1993

Problem

The Truck Payload Measurement System (TPMS) on certain 785 Trucks may not be as accurate as desired.

Affected Product
Model & Identification Number

785* (8GB1-669)


*If equipped with TPMS.

Parts Needed

1 - 0R6485 Control Group
1 - 9W0202 Film

Action Required

Remove the existing TPMS Control and replace it with a 0R6485 Control Group.

Setup and calibrate the TPMS by following procedures for setting up a new truck.

Place a 9W0202 Film on the new control.

Service Claim Allowances

NOTE: This is a 1-hour job.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

Product Support Program For Replacing The Inter-axle Differential Thrust Washers And Inter-axle Differential Output Shaft On Certain D40D And D400D Articulated Trucks Product Support Program For Replacing The Inter-axle Differential Thrust Washers And Inter-axle Differential Output Shaft On Certain D40D And D400D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
3S2708 Spring Pins Need To Be Removed From Parts Stock 3S2708 Spring Pins Need To Be Removed From Parts Stock
Product Support Program For Replacing Rusted Chrome Exhaust Stacks On Certain 416 Backhoe Loaders Product Support Program For Replacing Rusted Chrome Exhaust Stacks On Certain 416 Backhoe Loaders
The Rops Mounting Pad Welds Need To Be Inspected For Cracks On Certain CS431B, CP433B, And CS433B Compactors The Rops Mounting Pad Welds Need To Be Inspected For Cracks On Certain CS431B, CP433B, And CS433B Compactors
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework
8D3899 Washers Need To Be Removed From Parts Stock 8D3899 Washers Need To Be Removed From Parts Stock
Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders
New Centering Springs Need To Be Installed In the Steering Metering Pump On Certain 916 Loaders And IT18B Toolcarriers New Centering Springs Need To Be Installed In the Steering Metering Pump On Certain 916 Loaders And IT18B Toolcarriers
Electrical Wire Connections Need to Be Inspected On Certain 777B Trucks Electrical Wire Connections Need to Be Inspected On Certain 777B Trucks
SAFETY - THE WHEEL RIM NUTS NEED TO BE TIGHTENED ON CERTAIN IT18 AND IT28 TOOLCARRIERS; AND ON CERTAIN 926 AND 916 LOADERS - P I1202 - MAILED US AND CANADA, CACO SAFETY - THE WHEEL RIM NUTS NEED TO BE TIGHTENED ON CERTAIN IT18 AND IT28 TOOLCARRIERS; AND ON CERTAIN 926 AND 916 LOADERS - P I1202 - MAILED US AND CANADA, CACO
Product Support Program For Replacing The Auto-Vibe Switch 5E9512 Handle Assembly) And The Vibratory Lockout Switch On Certain CB434 And CB534 Vibratory Compactors Product Support Program For Replacing The Auto-Vibe Switch 5E9512 Handle Assembly) And The Vibratory Lockout Switch On Certain CB434 And CB534 Vibratory Compactors
Certain Batches Of Cat Engine Oil Need To Be Removed From Stock Certain Batches Of Cat Engine Oil Need To Be Removed From Stock
Product Support Program For Replacing The Water Spray Group Water Pump On Certain CB434 Compactors Product Support Program For Replacing The Water Spray Group Water Pump On Certain CB434 Compactors
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Product Support Program For Installing New Transmission Bearings In Certain 789 And 793 Trucks Product Support Program For Installing New Transmission Bearings In Certain 789 And 793 Trucks
Existing Bolts In The Final Drive Group Of Certain 120G Motor Graders Need To Be Replaced Existing Bolts In The Final Drive Group Of Certain 120G Motor Graders Need To Be Replaced
Product Support Program For Installing New Final Drive Planet Shafts And Bearings In Certain 776 And 776B Tractors; And 777 And 777B Trucks Product Support Program For Installing New Final Drive Planet Shafts And Bearings In Certain 776 And 776B Tractors; And 777 And 777B Trucks
New Wheels (Housings) Need To Be Installed In The Rear Final Drive And Brake Groups Of Certain D40D Articulated Dump Trucks New Wheels (Housings) Need To Be Installed In The Rear Final Drive And Brake Groups Of Certain D40D Articulated Dump Trucks
Product Support Program For Replacing The Midshaft Bearing On Cerrtain D350D And D400D Articulated Trucks Product Support Program For Replacing The Midshaft Bearing On Cerrtain D350D And D400D Articulated Trucks
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E
Product Support Program For Replacing The Fuel Injection Nozzles In Certain D3C, D4C, D4H, D5C, And D5C LGP Tractors; D4H Track Skidders; 931C, 935C, 943, And 953 Loaders; 916 And 926E Loaders; And IT18B And IT28B Tool Carriers Product Support Program For Replacing The Fuel Injection Nozzles In Certain D3C, D4C, D4H, D5C, And D5C LGP Tractors; D4H Track Skidders; 931C, 935C, 943, And 953 Loaders; 916 And 926E Loaders; And IT18B And IT28B Tool Carriers
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.