Information Plate Installed On BrakeSaver Housing
Usage:
3406, 3408 Truck Engines Equipped with BrakeSavers
Description of Change: An information plate is now installed on the BrakeSaver housing on 3406 and 3408 Truck Engines so equipped. The plate is installed on the left side, near the bottom of the housing, and is used for identification of the BrakeSaver Group No., Change No., Sequence No. and Test Code. This information will be of assistance to the serviceman when service work must be done on the unit.
Adaptable To: The new information plate is not adaptable to earlier engines because the necessary information is not available for the plate.
BrakeSaver information plate.
Caterpillar Information System:
1978/06/14 Attachment Groups Put Corrosion Inhibitor Directly Into Cooling System
1978/06/14 Explanation Of Nomenclature Used In Engine Performance
1978/06/14 5P9722 Driver Needed To Install New Seal Assembly In Water Pumps
1978/06/14 Lubrication For A Rebuilt Engine
1978/05/24 Modification Of Drive Adapter For Fuel Injection Test Bench
1978/05/24 If Auxiliary Bypass Oil Filters Are Used-Be Sure To Add Enough Extra Oil To Fill The Filters
1978/05/24 New Governor Spring Gives Correct Balance Point Speed
1978/05/24 Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24 New Gasket Installed Between Flywheel Housing And Cylinder Block
1978/05/24 Coolant Syringe And Battery Fluid Probe Now Available
1978/05/24 New Drive Belt Idler Pulleys Have Larger Bearings
1978/05/24 Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates
1978/06/14 Procedures And Cautions For Use Of A FLEX-HONE On 3204 And 3208 Engines
1978/06/14 List Of Service Publications
1978/07/05 5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed
1978/07/05 New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks
1978/07/05 Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05 A One-Piece Spring Seat Is Now Used In The Governor
1978/07/05 Grind Material From Boss On Parts Service Cylinder Block To Give Clearance For Starting Motor Mounting Bolt
1978/07/05 Mounting For Transmission/Torque Converter Oil Cooler Improved To Decrease Vibration
1978/07/05 New Color For Fiche In Engine Numerical Parts Record Library
1978/07/05 Disconnected Air Cleaner Hose Can Cause Engine Damage
1978/07/05 A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor
1978/07/05 New BrakeSaver Rotor Support Prevents Damage To Seals And Stator