1977/04/06 Caterpillar


New Shaft Assemblies Used For Forward And Reverse Clutch And Stronger Nipple Used At Oil Pump

Usage:


Twin Disc 514 Marine Gears

Description of Change: Induction hardened shaft assemblies for the forward and reverse clutch are now used to prevent possible damage to the clutch hub.

Also, a stronger nipple is used to connect the suction line to the oil pump. Vibration in some installations can cause failure of the former nipple.

Adaptable As: Direct replacement.

Caterpillar Information System:

1977/04/06 New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing
1977/04/06 Loose Bolts And/Or Bracket Can Cause Air Compressor Failures
1977/03/15 Cooling System Orifice Changed For Better Flow Control And Air Removal
1977/03/15 New Spring Used In Fuel Ratio Control
1977/03/15 Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15 Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15 Improved Exhaust Valve Now Available
1977/03/15 Hardened Washers Now Used Between The Bolt Heads And The Engine Front Support To Keep These Bolts Tight
1977/03/15 Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15 Clip Now Used To Hold Coolant Line For The Turbocharger
1977/03/15 Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor
1977/02/28 Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems
1977/04/06 Use Insert To Repair Bearing Seat In Water Pump Housing
1977/04/06 Coolant Flow Warning System Can Be Adapted To Many Earlier Models
1977/04/06 Revision Of Engine Data Sheet Gives Important Information On Single-Bearing Generators Assembled To Cat Engines
1977/04/06 New Diaphragm Used In Brakesaver Control Valve
1977/04/06 List Of Service Publications
1977/04/22 New Oversize Connecting Rod Bearings Have Improved Design And Material
1977/04/22 Improved Mounting For Expansion Tank
1977/04/22 Tools To Remove Wear Sleeves From Crankshafts
1977/04/22 New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22 Stronger Material Used In Undersize Connecting Rod Bearings
1977/04/22 List Of Service Publications
1977/05/03 Special Tools For Complete Repair Of Water Pump In Direct Injection Engines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.