1977/04/06 Caterpillar


List Of Service Publications

Usage:


This service information has become available since the last list. These forms can be ordered from your Caterpillar dealer to keep reference information current.

Caterpillar Information System:

1977/04/06 New Diaphragm Used In Brakesaver Control Valve
1977/04/06 Revision Of Engine Data Sheet Gives Important Information On Single-Bearing Generators Assembled To Cat Engines
1977/04/06 Coolant Flow Warning System Can Be Adapted To Many Earlier Models
1977/04/06 Use Insert To Repair Bearing Seat In Water Pump Housing
1977/04/06 New Shaft Assemblies Used For Forward And Reverse Clutch And Stronger Nipple Used At Oil Pump
1977/04/06 New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing
1977/04/06 Loose Bolts And/Or Bracket Can Cause Air Compressor Failures
1977/03/15 Cooling System Orifice Changed For Better Flow Control And Air Removal
1977/03/15 New Spring Used In Fuel Ratio Control
1977/03/15 Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15 Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15 Improved Exhaust Valve Now Available
1977/04/22 New Oversize Connecting Rod Bearings Have Improved Design And Material
1977/04/22 Improved Mounting For Expansion Tank
1977/04/22 Tools To Remove Wear Sleeves From Crankshafts
1977/04/22 New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22 Stronger Material Used In Undersize Connecting Rod Bearings
1977/04/22 List Of Service Publications
1977/05/03 Special Tools For Complete Repair Of Water Pump In Direct Injection Engines
1977/05/03 Improved Cylinder Block With Spacer Plate Used With New Cylinder Heads, Cylinder Head Gaskets, Cylinder Liners And Timing Gear Housing
1977/05/03 New Socket Assembly To Tighten The Bolts That Fasten The Sleeve Levers To The Sleeve Shaft
1977/05/13 New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13 New Information On Caterpillar Cooling System Inhibitor
1977/05/13 New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.