1985/05/27 Caterpillar

Remanufactured Bare Cylinder Heads (U.S. And Canada){1101,7754}

Usage:

Remanufactured Bare Cylinder Heads, which include plugs, inserts and guides are available for all Caterpillar engines. Bare heads will allow you to configure cylinder heads in your Service Department to reflect customer and territory needs. You will also receive quality repair for a fraction of the new cylinder head cost. Remanufactured Bare Cylinder Head prices range from 10 to 30% of a new head when a core, that is not cracked, is returned. When a cracked, damaged or previously welded core is returned, prices range from 30 to 60% of new.

Caterpillar has a commitment to offer quality, value-priced products and Remanufactured Bare Cylinder Heads are no exception. Since you can never be sure of welding quality, Caterpillar will not weld cylinder head castings without a controllable process. We back this guarantee with the same six month unlimited mileage-/hour warranty offered on new cylinder heads.

Part numbers and additional information on Caterpillar Remanufactured Bare Cylinder Heads can be found in IRM 84-19.

Caterpillar Information System:

1985/05/27 Rebuilt Axial Piston Pumps{5070}

1985/05/20 New Temperature Recorder Group (Crayons) Indicate Surface Temperature{0776}

1985/05/20 Make Sure Back-Up Alarm Switch Is Correctly Installed{7406}

1985/05/20 New Spark Resistant Air Starting Motor Group Has Serviceable Parts{1451}

1985/05/13 Check For Interference Between Water Temperature Regulator And Cylinder Head Bore{1355}

1985/05/13 Improved Radiator Cores Available{1350,1353}

1985/05/13 Preventing Transmission Manual Switch Failures{3168}

1985/05/13 Hydramechanical Governor Fuel Setting Information{1289,1250}

1985/05/13 New Piston Seal For 139.7 mm (5.50") Hydraulic Cylinders{5456,5457,5104,5458}

1985/05/06 Remanufactured Fuel Ratio Controls Are Available In U.S. And Canada{1278,7754}

1985/05/06 Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}

1985/05/06 New Bolt And Seal For Brake Make-Up Oil Tank{5056}

1985/05/27 Identification Of Track Motor Universal Joint Assemblies{3251,3201,5058}

1985/05/27 Low Charge Indicator Added To Rear Suspension Cylinders{7213}

1985/05/27 Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}

1985/05/27 Obtaining Correct Bolt Torque On Ground Engaging Tools{6800,7553}

1985/05/27 Additional Repair Parts Available For Fire Suppression Actuators{7400,7401}

1985/05/27 Correct Procedure To Check Tapered Bearing End Clearances{7551,3257,3300,3000}

1985/06/03 New Line Relief Valves Have Higher Leak Pressures And Less Noise{5453,5463,5464,5550}

1985/06/03 New Spider And Bearing Group And New Bolts Used In Drive Shaft Groups{3251,3253,3250}

1985/06/03 Preventing Skin Irritation From Petroleum Test Fluids{0353}

1985/06/03 Excessive Antifreeze Concentrations Can Cause Overheating{1350,1101}

1985/06/03 Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}

1985/06/03 Engine Slobbering{1059,1050}