Stronger Spanner Wrenches Now Available{0612,0613}
Usage:
Stronger spanner wrenches are available as direct replacements for former wrenches made with thinner metal. The chart which follows gives the dimensions of the 5 new spanner wrenches.
The new spanner wrenches are direct replacements for the former wrenches according to the following chart.
Caterpillar Information System:
1982/02/15 New Design Drain Tube For Transmission Solenoid Valve{3163,3167}
1982/02/15 Tools For Replacement Of 1M6762 Puller Ring To Remove Final Drive Outer Bearing Support{0621,4066}
1982/02/15 New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15 Improvements To Differential, Differential Carrier, And Differential Lock{3258,3264,3280}
1982/02/15 New 6V4810 Tool Group Used To Service Vehicles Equipped With VE (Vehicular Environmental) Series Electrical Connectors In Electrical Harness{0610,0620}
1982/02/08 Use Microfiche Libraries For Up-To-Date Information{0374}
1982/02/08 New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08 New Alternator And Fan Support Bracket{1356,1357,1405}
1982/02/08 The Service Publications Information Feedback System{0374}
1982/02/08 New Piston Pin Retainer Used{1214,1225}
1982/02/08 Use Correct Setting For Check And Relief Valve{0374,5214,5057}
1982/02/01 Stronger Lock Used In Differential Group{3280}
1982/02/15 Stronger Orifices Used In Control Valve{3167}
1982/02/22 New Water Pump And Rebuild Kit Available{1361}
1982/02/22 Difference Between Static And Dynamic Rack Settings Changed{0374,1257}
1982/02/22 Torque/Pressure Conversion Table For 6V200 Hydraulic Wrench{0614,0623}
1982/02/22 New Piston And More Springs Used In Transmission{3155,3170}
1982/02/22 Improved Bearing Used In Rear Power Takeoff Groups{3055}
1982/02/22 Use A Magnetic Chuck To Hold Parts On Work Bench{0626}
1982/02/22 Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22 Screen Added To Oil Lines At Inlet Of Brake And Torque Converter Oil Cooler{1366,1365,1375,1376,3103,3154,3179,4257,4304,5057,5068}
1982/02/22 Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22 New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/03/01 Shorter Bolts Used In Four Locations To Fasten Piston Motor Head To Body{3201,4351,5058}