New Design Drain Tube For Transmission Solenoid Valve{3163,3167}
Usage:
All 627B, 637D, 639D, 657, 657B, 666, 666B Scrapers;
768C, 772B, 776 Tractors;
769C, 773B, 777 Trucks
Description of Change: A new design drain tube, and different fittings are used for the transmission solenoid valves on the above models. The new design uses an L-shape tube, with fittings that have resilient (flexible) seals. This design makes correct assembly easier, and gives better protection against tube failures caused by vibration.
Adaptable As: Direct replacement when the new parts are used together.
New drain tube and fittings.
Caterpillar Information System:
1982/02/15 Tools For Replacement Of 1M6762 Puller Ring To Remove Final Drive Outer Bearing Support{0621,4066}
1982/02/15 New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15 Improvements To Differential, Differential Carrier, And Differential Lock{3258,3264,3280}
1982/02/15 New 6V4810 Tool Group Used To Service Vehicles Equipped With VE (Vehicular Environmental) Series Electrical Connectors In Electrical Harness{0610,0620}
1982/02/08 Use Microfiche Libraries For Up-To-Date Information{0374}
1982/02/08 New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08 New Alternator And Fan Support Bracket{1356,1357,1405}
1982/02/08 The Service Publications Information Feedback System{0374}
1982/02/08 New Piston Pin Retainer Used{1214,1225}
1982/02/08 Use Correct Setting For Check And Relief Valve{0374,5214,5057}
1982/02/01 Stronger Lock Used In Differential Group{3280}
1982/02/01 New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/15 Stronger Spanner Wrenches Now Available{0612,0613}
1982/02/15 Stronger Orifices Used In Control Valve{3167}
1982/02/22 New Water Pump And Rebuild Kit Available{1361}
1982/02/22 Difference Between Static And Dynamic Rack Settings Changed{0374,1257}
1982/02/22 Torque/Pressure Conversion Table For 6V200 Hydraulic Wrench{0614,0623}
1982/02/22 New Piston And More Springs Used In Transmission{3155,3170}
1982/02/22 Improved Bearing Used In Rear Power Takeoff Groups{3055}
1982/02/22 Use A Magnetic Chuck To Hold Parts On Work Bench{0626}
1982/02/22 Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22 Screen Added To Oil Lines At Inlet Of Brake And Torque Converter Oil Cooler{1366,1365,1375,1376,3103,3154,3179,4257,4304,5057,5068}
1982/02/22 Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22 New Idler Shaft Used In Fuel Transfer Pumps{1256}