Use 126-7175 Push Puller Assembly For Various General Purpose Applications{0600}
Usage:
All Commercial Engines
Warranty: G
Features/Benefits
-
- * Used to apply up to 13 tons of force for pulling or pushing applications.
- * Set includes four different lengths of extension legs (can be joined together with adapters for additional reach).
- * Forcing screw has 1/2 inch square drive.
- * All parts can be ordered separately.
- * Used to apply up to 13 tons of force for pulling or pushing applications.
Specifications/Technical Information
- Capacity - 13 ton
- Spread - 53.8 to 184.2 mm (2.12 to 7.25 in)
- Square drive - 1/2 inch
- Spread - 53.8 to 184.2 mm (2.12 to 7.25 in)
Caterpillar Information System:
1998/02/01 New Air Shut-Off Group Provides Increased Serviceability And Reliability {1078}
1998/02/01 Aftercooler Core Performance Measurement {1064}
1998/02/01 New Exhaust Fitting Assembly Improves Reliability For Exhaust Bellows {1061}
1998/02/01 Be Sure To Consider Combustion Air Content When Assessing Air Induction System Damage {1051,1058,1063,1087}
1998/02/01 Replacement Labels Available For Contactors {0653,7400}
1998/02/01 3600 Diesel Marine Monitoring System Owner's Manual Available {0374}
1998/02/01 1997 3600 Diesel Technical Communicators Conference Participant's Guide Available {0374}
1998/02/01 Breather Group Tee Hose And Elbow Hose Made From More Heat Resistant Material {1317}
1998/02/01 New Shut-Off Solenoid Group And Air Shut-Off Group Used In Air Shut-Off Groups {1078}
1998/02/01 Installation Of Sleeve Bearing In Cluster Gear Assembly In Front Gear Group {1206}
1998/02/01 New Seal Between Front And Rear Stator Housings {1552}
1998/01/20 Gas Engine Fuel Specifications {1280}
1998/03/01 Use 1U-9500 Flow Communicator On Caterpillar Diagnostic Tools{1250,0782}
1998/03/01 Replacement Available For 7M-7260 Liquid Gasket{0648,0649,0651}
1998/03/01 Replacements Products Available For 4C-4079 Brake And Component Cleaner{0680}
1998/03/01 8N-4617 Air Cleaner Clamp Kit Available{1051}
1998/03/01 Caterpillar Electronic Technician (ET) Training Video Available{0374}
1998/03/01 Improved Governor Raise/Lower Motor Used In Governor Control Groups{1264}
1998/03/01 New More Efficent Turbocharger And Exhaust Bypass Group For The G3406 Low Compression Ratio Gas Engines{1057,1052}
1998/03/01 Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels{1105,1121}
1998/03/01 New Piston Cooling Jet Tube Assembly Provides Increased Piston Clearance{1331}
1998/03/01 New Pump Group Used In Auxiliary (Fresh Water) Pump Group For Separate Circuit Aftercooler (SCAC){1371}
1998/03/01 Process Changes Result In Improved 3500 Engine Remanufactured Connecting Rod Assembly{1218}
1998/03/01 The Ignition Bulkhead Connector Reoriented To Help Prevent Moisture Damage{1408}