Installation Of Sleeve Bearing In Cluster Gear Assembly In Front Gear Group {1206}
Usage:
3406E (6BR) Industrial, 3406E (9WR) Marine Engines
To help prevent distortion of the 131-7123 Sleeve Bearing, the sleeve bearing should be cooled to -18°C (0°F) for 1/2hour before pressing the sleeve bearing into the 128-2659 Cluster Gear Assembly. The 128-2659 Cluster Gear Assembly is part of the 102-8397 Front Gear Group on these engines.
Illustration 1.
Location of the 128-2659 Cluster Gear Assembly in the 102-8397 Front Gear Group.
Illustration 2.
Location of the 131-7123 Sleeve Bearing in the 128-2659 Cluster Gear Assembly.
Caterpillar Information System:
1998/02/01 New Seal Between Front And Rear Stator Housings {1552}
1998/01/20 Gas Engine Fuel Specifications {1280}
1998/01/20 New Stud And Nut Replace Unit Injector Hold Down Bolt In Fuel Injection Pump Group {1290}
1998/01/20 Cleaning Exhaust Manifolds On 3600 Engines Operating On Heavy Fuel Oil {1059}
1998/01/20 Final Adjustment For Hydrax Controlled Exhaust Bypass (Wastegate) Group {1057}
1998/01/20 Procedure For Testing Electronic Ignition System (EIS) Transformer Groups {1550}
1998/01/20 New Tightening Specification For "Spin-on" Oil Filter Assembly {1306,1308}
1998/01/20 Articulated Pistons Used {1214}
1998/01/20 Improved Water Seal Reduces The Possibility Of Cylinder Head Joint Water Leaks {1100}
1998/01/20 New Support Assembly (Turbocharger) Added {1059}
1998/01/20 The 154-6732 Pump Kit Is Available To Help Service The Unit Injector Hydraulic Pump Group {1714}
1998/01/20 New Cast Iron Flywheel Housing Used In Flywheel Housing Groups {1157}
1998/02/01 New Shut-Off Solenoid Group And Air Shut-Off Group Used In Air Shut-Off Groups {1078}
1998/02/01 Breather Group Tee Hose And Elbow Hose Made From More Heat Resistant Material {1317}
1998/02/01 1997 3600 Diesel Technical Communicators Conference Participant's Guide Available {0374}
1998/02/01 3600 Diesel Marine Monitoring System Owner's Manual Available {0374}
1998/02/01 Replacement Labels Available For Contactors {0653,7400}
1998/02/01 Be Sure To Consider Combustion Air Content When Assessing Air Induction System Damage {1051,1058,1063,1087}
1998/02/01 New Exhaust Fitting Assembly Improves Reliability For Exhaust Bellows {1061}
1998/02/01 Aftercooler Core Performance Measurement {1064}
1998/02/01 New Air Shut-Off Group Provides Increased Serviceability And Reliability {1078}
1998/03/01 Use 126-7175 Push Puller Assembly For Various General Purpose Applications{0600}
1998/03/01 Use 1U-9500 Flow Communicator On Caterpillar Diagnostic Tools{1250,0782}
1998/03/01 Replacement Available For 7M-7260 Liquid Gasket{0648,0649,0651}