1997/11/14 Caterpillar


New Master Parts Manuals Available For The 3600 Family Of Engines{0374}

Usage:


3606 (8RB),
3608 (6MC),
3612 (9RC),
3616 (1PD) Generator, Industrial, Locomotive, And Marine Engines;
3612 (9FR),
3616 (1FN) Marine Engines G3606 (3XF),
G3608 (4WF),
G3612 (1YG),
G3616 (4CG) Generator, Industrial, Locomotive, And Marine Engines

New master parts manuals are available for these engines. These new parts manuals are adaptable to first production and up of these engines. The chart identifies the new parts manuals. These parts manuals are available through the literature ordering system.

Caterpillar Information System:

1997/11/14 Silicone Lubricant Aids Installation Of Transformer Extension And Increases Life Of Extension O-Ring Seal{1409}
1997/11/14 Handling Instructions For Water Pumps{1361}
1997/11/14 Part Numbers For Current Production Water Pump Groups{1361}
1997/11/14 Electronic Control Group (Data Booster) Available In Order To Enhance The Signal From The Electronic Control Module (ECM) To The Receiving Device{1408}
1997/11/14 Improved Indicator Assembly Replaces The Former Indicator Assembly{7455}
1997/11/14 Special Instruction, REHS0164, "Conversion Of Generators From Self-Excited To Permanent Magnet" Is Available{4450}
1997/11/14 History Of Pump Impeller (Water Pump) Changes{1364}
1997/11/14 Significant Improvement For Pump Impellers (Water Pumps){1364}
1997/11/14 New Troubleshooting Guide Available{0374}
1997/10/10 Setpoint Value Explanation For "Low Oil Pressure Shutdown At Idle Speed" Added To SENR5809-03 Electronic Modular Control Panel (EMCP II) For MUI Engines{4490}
1997/10/10 Water Cooled Pre-Chamber Insert Available{1103}
1997/10/10 Flexible Hose Assembly Replaces Tube Assemblies In Instrument Panel Lines Groups{7451}
1997/11/14 New Spark Plug On G3600 Engines Improves Reliability{1555}
1997/11/14 Illustration Changes To EMCP II+{4490}
1997/11/14 Two Versions Of Customer Communications Module Software Available For Personal Computers{1926}
1997/11/14 Proper Welding Procedure On Machines And Engines With Electronic Controls{1400}
1997/12/16 Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1997/12/16 New Fuel Line Support Brackets Help Eliminate Vibration {1252}
1997/12/16 New Stub Shaft (Crankshaft) Replaces The Former Stub Shaft (Crankshaft) {1237}
1997/12/16 New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16 Be Sure To Use Correct Valve When Replacing The Mixer Assembly In Carburetor Group {1266}
1997/12/16 New O-Ring Seal Used In Landfill Regulator Groups {1270}
1997/12/16 New Solenoid Valve Group (Gas Shutoff) Provides Improved Reliability {1704}
1997/12/16 Manifold Inlet Air Temperature Indicator Probe Relocated To Improve Gauge Reliability {7450}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.