1993/11/01 Caterpillar


Training Available Via Videotapes For Service And Marketing Systems

Usage:


To help meet customers' training needs, Marketing Systems Division has created videotapes which provide basic training on the following:

* Service Claims Reporting System
* Service Claims System
* SIMS (Service Information Management System)
* Product Information System (PIS)
* FIND (both SIRS and TEXT)
* E-Mail
* Dealer Sales and Inventory Maintenance System
* Machine Marketing Information System (MMIS)
* Parts Marketing Information System (PMIS)
* Engine Marketing Information System (EMIS)

While the tapes are geared toward the dealer audience, benefits can also be realized by Caterpillar employees. Each videotape opens with an introduction, including the features and benefits, and then provides hands-on demonstrations of the system's functions.

Each videotape is segmented so the viewer can either watch it in its entirety or can readily find a particular topic of interest. A Reference Guide, which lists the topics covered and respective segment numbers, is included with each tape.

To facilitate viewer feedback, a master critique sheet is included with each videotape. Viewers are asked to make a copy of the critique sheet, fill it out, and mail it to the address provided on the sheet.

The videotapes are available in English in VHS (NTSC), PAL, and SECAM formats. The following chart identifies the titles and media numbers for each format. Use the media numbers to order through the Caterpillar Literature Ordering System.

Questions regarding the videotapes can be directed to:

Caterpillar Inc.
Attn: Jan Hogan
100 N. E. Adams
Peoria, II 61629-6160
Phone: (309) 675-1316
Fax: (309) 675-1813
E-Mail: HOGANJH DPGO

Caterpillar Information System:

1993/11/01 0R5207 Remanufactured Starter May Not Fit In Some Applications
1993/11/01 8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01 New Exhaust Valve and Water Cooled Valve Seat Inserts (Heavy Fuel Engines Only)
1993/11/01 Alarm/Shutdown System For Cogeneration Or Landfill Applications
1993/11/01 Oil Recommendations For The 3500 Family Of Engines
1993/11/01 New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01 Remanufactured Cylinder Packs Available
1993/10/01 Air Filter Indicator Maintenance
1993/10/01 Location Of Drain Plugs In Cylinder Block For Air Inlet Manifold
1993/10/01 Wiring Diagram for G3500 Prelube Pump
1993/10/01 New Oil Drain Valve Assembly Used Prevents Oil Leaks
1993/10/01 New Connecting Rod Identification Used On Engines
1993/12/01 New Control Assemblies Used In Fuel Injection Control Groups
1993/12/01 New Fuel Filter Helps Prevent Hard Starting Due To Injector Wear
1993/12/01 Clarify Usage Of Parts Service Cylinder Head Gaskets
1993/12/01 The 1W-1420 Oil Cooler Bracket For Marine Gears Has Been Modified
1993/12/01 New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/12/01 New Inlet/Exhaust Valve Has A Chrome Stem
1993/12/01 Carburetor Control Linkage (EG3P Governor)
1993/12/01 New High Temperature Resistant Seal Group Available For Jacket Water Pump
1993/12/01 Oil Guidelines For 3600 Engines
1993/12/01 Uses, Characteristics, And Removal of Castrol Tarp®, Tarp-B®, And 4164®
1994/01/01 New Valve Cover Gasket Used{1107}
1994/01/01 Low Coolant Level Plate In Radiator May Cause False Coolant Level Readings{1353}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.