1993/11/01 Caterpillar


Remanufactured Cylinder Packs Available

Usage:


G3304 (37Y),
G3306 (07Y) Engines

Remanufactured cylinder packs are available for the above engines. The 0R-3662 Remanufactured Cylinder Pack is available for low compression ratio (8:1) engines and the 0R-3661 Remanufactured Cylinder Pack is available for high compression ratio (10.5:1) engines. The original pistons in these engines had two rings. Three ring pistons are used in the remanufactured cylinder packs. The three ring pistons offer reduced oil consumption compared to the original two ring pistons.

Caterpillar Information System:

1993/10/01 Air Filter Indicator Maintenance
1993/10/01 Location Of Drain Plugs In Cylinder Block For Air Inlet Manifold
1993/10/01 Wiring Diagram for G3500 Prelube Pump
1993/10/01 New Oil Drain Valve Assembly Used Prevents Oil Leaks
1993/10/01 New Connecting Rod Identification Used On Engines
1993/10/01 New O-ring Seal Used On Cylinder Block Covers
1993/10/01 New 9U7360 Piston Ring Groove Gauge Group Available
1993/10/01 Improved Crankshaft Seal Groups Used
1993/10/01 Cleaning Kit Available For High Performance Marine Engine Air Filters
1993/09/01 Additional Vibration Limits For Generator Set Engines
1993/09/01 Air Intake Filters Available As An Attachment
1993/09/01 Low Sulfur Fuel (USA Low Emission Engine Operation; Low Sulfur Fuel Outside The USA)
1993/11/01 New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01 Oil Recommendations For The 3500 Family Of Engines
1993/11/01 Alarm/Shutdown System For Cogeneration Or Landfill Applications
1993/11/01 New Exhaust Valve and Water Cooled Valve Seat Inserts (Heavy Fuel Engines Only)
1993/11/01 8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01 0R5207 Remanufactured Starter May Not Fit In Some Applications
1993/11/01 Training Available Via Videotapes For Service And Marketing Systems
1993/12/01 New Control Assemblies Used In Fuel Injection Control Groups
1993/12/01 New Fuel Filter Helps Prevent Hard Starting Due To Injector Wear
1993/12/01 Clarify Usage Of Parts Service Cylinder Head Gaskets
1993/12/01 The 1W-1420 Oil Cooler Bracket For Marine Gears Has Been Modified
1993/12/01 New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.